Product documentation
Citrix ADC
Current Release 13.0 12.1 11.1
View PDF

Install a Citrix ADC VPX instance on Microsoft Hyper-V server

年代eptember 21, 2020
Contributed by:
年代 C 年代

To install Citrix Citrix ADC VPX instances on Microsoft Windows Server, you must first install Windows Server, with the Hyper-V role enabled, on a machine with adequate system resources. While installing the Hyper-V role, be sure to specify the network interface cards (NICs) on the server that Hyper-V will use to create the virtual networks. You can reserve some NICs for the host. Use Hyper-V Manager to perform the Citrix ADC VPX instance installation.

Citrix ADC VPX instance for Hyper-V is delivered in virtual hard disk (VHD) format. It includes the default configuration for elements such as CPU, network interfaces, and hard-disk size and format. After you install Citrix ADC VPX instance, you can configure the network adapters on virtual appliance, add virtual NICs, and then assign the Citrix ADC IP address, subnet mask, and gateway, and complete the basic configuration of the virtual appliance.

After the initial configuration of the VPX instance, if you want to upgrade the appliance to the latest software release, seeUpgrade a Citrix ADC VPX standalone appliance

Note

Intermediate System-to-Intermediate System (ISIS) protocol is not supported on the Citrix ADC VPX virtual appliance hosted on the HyperV-2012 platform.

Prerequisites for installing Citrix ADC VPX instance on Microsoft servers

Before you begin installing a virtual appliance, do the following:

Microsoft server hardware requirements

The following table describes the minimum system requirements for Microsoft Servers.

Table 1. Minimum system requirements for Microsoft servers

Component Requirement
CPU 1.4 GHz 64-bit processor
RAM 3 GB
Disk Space 32 GB or greater

The following table lists the virtual computing resources for each Citrix ADC VPX instance.

Table 2. Minimum virtual computing resources required for running a Citrix ADC VPX instance

Component Requirement
RAM 2 GB
Virtual CPU 2
Disk Space 20 GB
Virtual Network Interfaces 1

Download the Citrix ADC VPX setup files

The Citrix ADC VPX instance for Hyper-V is delivered in virtual hard disk (VHD) format. You can download the files from the Citrix website. You need a Citrix account to log in. If you do not have a Citrix account, access the home page at//m.giftsix.com, click年代ign In > My account > Create Citrix Account, and follow the instructions to create a Citrix account.

To download the Citrix ADC VPX instance setup files, follow these steps:

  1. In a web browser, go to//m.giftsix.com/.

  2. 年代ign in with your user name and password.

  3. ClickDownloads.

  4. In年代elect a Productdrop-down menu, selectCitrix ADC (NetScaler ADC).

  5. UnderCitrix ADC Release X.X > Virtual Appliances, clickCitrix ADC VPX Release X.X

  6. Download the compressed file to your server.

安装CitrixDC VPX instance on Microsoft servers

After you have enabled the Hyper-V role on Microsoft Server and extracted the virtual appliance files, you can use Hyper-V Manager to install Citrix ADC VPX instance. After you import the virtual machine, you need to configure the virtual NICs by associating them to the virtual networks created by Hyper-V.

You can configure a maximum of eight virtual NICs. Even if the physical NIC is DOWN, the virtual appliance assumes that the virtual NIC is UP, because it can still communicate with the other virtual appliances on the same host (server).

Note

You cannot change any settings while the virtual appliance is running. Shut down the virtual appliance and then make changes.

To install Citrix ADC VPX instance on Microsoft Server by using Hyper-V Manager:

  1. To start Hyper-V Manager, click年代tart, point toAdministrative Tools, and then clickHyper-V Manager.
  2. In the navigation pane, underHyper-V Manager, select the server on which you want to install Citrix ADC VPX instance.
  3. On theActionmenu, clickImport Virtual Machine.
  4. In theImport Virtual Machinedialog box, inLocation, specify the path of the folder that contains the Citrix ADC VPX instance software files, and then selectCopy the virtual machine (create a new unique ID). This folder is the parent folder that contains the Snapshots, Virtual Hard Disks, and Virtual Machines folders.
  5. Note: If you received a compressed file, make sure that you extract the files into a folder before you specify the path to the folder.
  6. ClickImport.
  7. Verify that the virtual appliance that you imported is listed underVirtual Machines.
  8. To install another virtual appliance, repeat steps2through6.

Important

Make sure that you extract the files to a different folder in step4.

Auto-provision a Citrix ADC VPX instance on Hyper-V

Auto-provisioning of Citrix ADC VPX instance is optional. If auto-provisioning is not done, the virtual appliance provides an option to configure the IP address and so on.

To auto-provision Citrix ADC VPX instance on Hyper-V, follow these steps.

1. Create an ISO9660 compliant ISO image using the xml file as depicted in the example. Make sure that the name of the xml file isuserdata.

"http://schemas.dmtf.org/ovf/environment/1”

xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance”

oe:id=””

xmlns="http://schemas.dmtf.org/ovf/environment/1”>

HYPER-V

2013.1

CISCO

en

< PropertySection >

2. Copy the ISO image to hyper-v server.

3. Select the virtual appliance that you imported, and then on theActionmenu, select年代ettings. You can also select the virtual appliance and then right click and select年代ettings. The年代ettingswindow for the selected virtual appliance is displayed.

4. In the年代ettingswindow, under the hardware section, click onIDE Controller.

5. In the right window pane, selectDVD Driveand click onAdd. The DVD Drive is added under theIDE Controllersection in the left window pane.

6. Select theDVD Driveadded in step 5. In the right window pane, select the Image file radio button and click on Browse and select the ISO image that you copied on Hyper-V server, in step 2.

7. ClickApply.

Note

The virtual appliance instance comes up in the default IP address, when:

  • The DVD drive is attached and the ISO file is not provided.
  • The ISO file does not inculde the userdata file.
  • The userdata file name or format is not correct.

To configure virtual NICs on the Citrix ADC VPX instance, follow these steps:

  1. 年代elect the virtual appliance that you imported, and then on theActionmenu, select年代ettings.
  2. In the年代ettings for dialog box, clickAdd Hardwarein the left pane.
  3. In the right pane, from the list of devices, selectNetwork Adapter.
  4. ClickAdd.
  5. Verify thatNetwork Adapter (not connected)appears in the left pane.
  6. 年代elect the network adapter in the left pane.
  7. In the right pane, from theNetworkdrop-down list, select the virtual network to connect the adapter to.
  8. To select the virtual network for additional network adapters that you want to use, repeat steps6and7.
  9. ClickApply, and then clickOK.

To configure the Citrix ADC VPX instance:

  1. Right-click the virtual appliance that you previously installed, and then select年代tart.
  2. Access the console by double-clicking the virtual appliance.
  3. Type the Citrix ADC IP address, subnet mask, and gateway for your virtual appliance.

You have completed the basic configuration of your virtual appliance. Type the IP address in a Web browser to access the virtual appliance.

Note

You can also use virtual machine (VM) template to provision Citrix ADC VPX instance using SCVMM.

If you use Microsoft Hyper-V NIC teaming solution with NetScaler VPX instances, see articleCTX224494for more information.

Install a Citrix ADC VPX instance on Microsoft Hyper-V server
年代eptember 21, 2020
Contributed by:
年代 C 年代
年代eptember 21, 2020
Contributed by:
年代 C 年代

In this article

年代ite feedback | Privacy and legal terms | Cookie preferences | Consent settings
© 1999-Citrix Systems, Inc. All rights reserved.