ADC

Resilient LLB Deployment Scenario

In the following diagram, there are two networks: 30.30.30.0 and 30.30.31.0. Link load balancing is configured based on the destination IP address. Two routes are configured with gatewaysRouter1-vipandRouter2-vip, respectively.Router1-vipis configured as a backup toRouter2-vipand vice versa. All traffic with the destination IP specified as 30.30.30.30 is sent throughRouter1-vipand traffic with the destination IP specified as 30.30.31.31 is sent throughRouter2-vip.

Figure 1. Resilient LLB Deployment Setup

localized image

Note: If your Internet service provider has provided an IPv6 address, replace the IPv4 service with an IPv6 service in the above figure.

However, if any one of the gateways (Router1-viporRouter2-vip) is DOWN, traffic is routed through the backup router. In the following diagram,Router1-vipfor ISP1 is DOWN, so all traffic with the destination IP specified as 30.30.30.30 is also sent through ISP2.

Figure 2. Resilient LLB Deployment Scenario

localized image

Note:If your Internet service provider has provided an IPv6 address, replace the IPv4 service with an IPv6 service in the above figure.

Resilient LLB Deployment Scenario