Enabling authentication, authorization, and auditing

To use the authentication, authorization, and auditing - Application Traffic feature, you must enable it. You can configure authentication, authorization, and auditing entities—such as the authentication and traffic management virtual servers—before you enable the authentication, authorization, and auditing feature, but the entities will not function until the feature is enabled.

To enable authentication, authorization, and auditing by using the command line interface

At the command prompt, type the following commands to enable authentication, authorization, and auditing and verify the configuration:

• enable ns feature AAA

• show ns feature

  Example

• enable feature AAA

  Done

• show ns feature

  Feature Acronym Status ------- ------- ------ 1) Web Logging WL OFF 2) Surge Protection SP ON . . . 15) AAA AAA ON . . . 23) HTML Injection HTMLInjection ON 24) NetScaler Push push OFF Done

To enable authentication, authorization, and auditing by using the configuration utility

1. Navigate toSystem > Settings.
2. In the details pane, underModes and Features, clickChange Basic Features.
3. In theConfigure Basic Featuresdialog box, select theAuthentication, Authorization and Auditingcheck box.
4. ClickOK.