Getting Started with Citrix ADC
Deploy a Citrix ADC VPX instance
Install a Citrix ADC VPX instance on VMware ESX
配置Citrix ADC Virtual Appliances to use VMXNET3 Network Interface
配置Citrix ADC Virtual Appliances to use Single Root I/O Virtualization (SR-IOV) Network Interface
Migrating the Citrix ADC VPX from E1000 to SR-IOV or VMXNET3 Network Interfaces
配置Citrix ADC Virtual Appliances to use PCI Passthrough Network Interface
Install a Citrix ADC VPX instance on Microsoft Hyper-V servers
Install a Citrix ADC VPX instance on Linux-KVM platform
Prerequisites for Installing Citrix ADC VPX Virtual Appliances on Linux-KVM Platform
Provisioning the Citrix ADC Virtual Appliance by using OpenStack
Provisioning the Citrix ADC Virtual Appliance by using the Virtual Machine Manager
配置Citrix ADC Virtual Appliances to Use SR-IOV Network Interface
配置Citrix ADC Virtual Appliances to use PCI Passthrough Network Interface
Provisioning the Citrix ADC Virtual Appliance by using the virsh Program
Provisioning the Citrix ADC Virtual Appliance with SR-IOV, on OpenStack
配置a Citrix ADC VPX Instance on KVM to Use OVS DPDK-Based Host Interfaces
Deploy a Citrix ADC VPX instance on Microsoft Azure
Network architecture for Citrix ADC VPX instances on Microsoft Azure
Configure multiple IP addresses for a Citrix ADC VPX standalone instance
Configure a high-availability setup with multiple IP addresses and NICs
Configure a high-availability setup with multiple IP addresses and NICs by using PowerShell commands
Configure HA-INC nodes by using the Citrix high availability template with Azure ILB
Configure address pools (IIP) for a Citrix Gateway appliance
Upgrade and downgrade a Citrix ADC appliance
Authentication, authorization, and auditing application traffic
-
-
-
-
-
Persistence and persistent connections
Advanced load balancing settings
Gradually stepping up the load on a new service with virtual server–level slow start
Protect applications on protected servers against traffic surges
Retrieve location details from user IP address using geolocation database
Use source IP address of the client when connecting to the server
Set a limit on number of requests per connection to the server
Configure automatic state transition based on percentage health of bound services
Use case 2: Configure rule based persistence based on a name-value pair in a TCP byte stream
Use case 3: Configure load balancing in direct server return mode
Use case 6: Configure load balancing in DSR mode for IPv6 networks by using the TOS field
Use case 7: Configure load balancing in DSR mode by using IP Over IP
Use case 10: Load balancing of intrusion detection system servers
Use case 11: Isolating network traffic using listen policies
Use case 12: Configure Citrix Virtual Desktops for load balancing
Use case 13: Configure Citrix Virtual Apps for load balancing
Use case 14: ShareFile wizard for load balancing Citrix ShareFile
-
-
-
-
Authentication and authorization
-
配置a CloudBridge Connector Tunnel Between a Citrix ADC Appliance and Virtual Private Gateway on AWS
配置a CloudBridge Connector Tunnel Between a Datacenter and Azure Cloud
配置中心思想dBridge Connector Tunnel between Datacenter and SoftLayer Enterprise Cloud
配置a CloudBridge Connector Tunnel Between a Citrix ADC Appliance and Cisco IOS Device
配置a CloudBridge Connector Tunnel Between a Citrix ADC Appliance and Fortinet FortiGate Appliance
中心思想dBridge Connector Tunnel Diagnostics and Troubleshooting
This content has been machine translated dynamically.
Dieser Inhalt ist eine maschinelle Übersetzung, die dynamisch erstellt wurde.(Haftungsausschluss)
Cet article a été traduit automatiquement de manière dynamique.(Clause de non responsabilité)
Este artículo lo ha traducido una máquina de forma dinámica.(Aviso legal)
此内容已经过机器动态翻译。放弃
このコンテンツは動的に機械翻訳されています。免責事項
이 콘텐츠는 동적으로 기계 번역되었습니다.책임 부인
Este texto foi traduzido automaticamente.(Aviso legal)
Questo contenuto è stato tradotto dinamicamente con traduzione automatica.(Esclusione di responsabilità))
This article has been machine translated.
Dieser Artikel wurde maschinell übersetzt.(Haftungsausschluss)
Ce article a été traduit automatiquement.(Clause de non responsabilité)
Este artículo ha sido traducido automáticamente.(Aviso legal)
この記事は機械翻訳されています.免責事項
이 기사는 기계 번역되었습니다.책임 부인
Este artigo foi traduzido automaticamente.(Aviso legal)
这篇文章已经过机器翻译.放弃
Questo articolo è stato tradotto automaticamente.(Esclusione di responsabilità))
Translation failed!
Managing a Content Switching Setup
After a content switching setup is configured, it may require periodic changes. When operating systems or software are updated, or hardware wears out and is replaced, you may need to take down your setup. Load on your setup may increase, requiring additional resources. You may also modify the configuration to improve performance.
These tasks may require unbinding policies from the content switching virtual server, or disabling or removing content switching virtual servers. After you have made changes to your setup, you may need to re-enable servers and rebind policies. You might also want to rename your virtual servers.
Unbinding Policies from the Content Switching Virtual Server
When you unbind a content switching policy from its virtual server, the virtual server no longer includes that policy when determining where to direct requests.
To unbind a policy from a content switching virtual server by using the command line interface
At the command prompt, type:
unbind cs vserver
Example:
unbind cs vserver Vserver-CS-1 -policyname Policy-CS-1
To unbind a policy from a content switching virtual server by using the configuration utility
- Navigate toTraffic Management > Content Switching > Virtual Servers, and open the virtual server.
- ClickPoliciessection, select the policy, and clickUnbind.
Removing Content Switching Virtual Servers
You normally remove a content switching virtual server only when you no longer require the virtual server. When you remove a content switching virtual server, the Citrix ADC appliance first unbinds all policies from the content switching virtual server, and then removes it.
To remove a content switching virtual server by using the command line interface
At the command prompt, type:
rm cs vserver
Example:
rm cs vserver Vserver-CS-1
To remove a content switching virtual server by using the configuration utility
Navigate toTraffic Management > Content Switching > Virtual Servers, select a virtual server, and click删除.
Disabling and Re-Enabling Content Switching Virtual Servers
Content switching virtual servers are enabled by default when you create them. You can disable a content switching virtual server for maintenance. If you disable the content switching virtual server, the state of the content switching virtual server changes to Out of Service. While out of service, the content switching virtual server does not respond to requests.
To disable or re-enable a virtual server by using the command line interface
At the command prompt, type one of the following commands:
disable cs vserver
enable cs vserver
Example:
`disable cs vserver Vserver-CS-1 `enable cs vserver Vserver-CS-1`
To disable or re-enable a virtual server by using the configuration utility
Navigate toTraffic Management > Content Switching > Virtual Servers, select a virtual server and, in theActionlist, selectEnableorDisable.
Renaming Content Switching Virtual Servers
You can rename a content switching virtual server without unbinding it. The new name is propagated automatically to all affected parts of the Citrix ADC configuration.
To rename a virtual server by using the command line interface
At the command prompt, type:
rename cs vserver
Example:
`rename cs vserver Vserver-CS-1 Vserver-CS-2`
To rename a virtual server by using the configuration utility
Navigate toTraffic Management > Content Switching > Virtual Servers, select a virtual server and, in theActionlist, selectRename.
Managing Content Switching Policies
You can modify an existing policy by configuring rules or changing the URL of the policy, or you can remove a policy. You can also rename an existing advanced content switching policy. You can create different policies based on the URL. URL-based policies can be of different types, as described in the following table.
For more information, seeExamples of URL-Based Policiespdf.
Note
You can configure rule-based content switching using classical policy expressions or advanced policy expressions.
To modify, remove, or rename a policy by using the command line interface
At the command prompt, type one of the following commands:
set cs policy
[-domain ] [-rule ] [-url ] rm cs policy
rename cs policy
Example:
set cs policy Policy-CS-1 -domain "www.domainxyz.com" set cs policy Policy-CS-1 -rule "CLIENT.IP.SRC.SUBNET(22).EQ(10.100.148.0)" set cs policy Policy-CS-2 -rule "SYS.TIME.BETWEEN(GMT 2010 Jun,GMT 2010 Jul)" set cs policy Policy-CS-1 -url /sports/* rename cs policy Policy-CS-1 Policy-CS-11 rm cs policy Policy-CS-1
To modify, remove, or rename a policy by using the configuration utility
- Navigate toTraffic Management > Content Switching > Policies.
- Select the policy, and either delete it, edit it or, in theActionlist, clickRename.
Share
Share
This Preview product documentation is Citrix Confidential.
You agree to hold this documentation confidential pursuant to the terms of your Citrix Beta/Tech Preview Agreement.
The development, release and timing of any features or functionality described in the Preview documentation remains at our sole discretion and are subject to change without notice or consultation.
The documentation is for informational purposes only and is not a commitment, promise or legal obligation to deliver any material, code or functionality and should not be relied upon in making Citrix product purchase decisions.
如果你不同意,不同意选择退出。