Getting Started with Citrix ADC
Deploy a Citrix ADC VPX instance
Install a Citrix ADC VPX instance on Microsoft Hyper-V servers
Install a Citrix ADC VPX instance on Linux-KVM platform
Prerequisites for Installing Citrix ADC VPX Virtual Appliances on Linux-KVM Platform
Provisioning the Citrix ADC Virtual Appliance by using OpenStack
Provisioning the Citrix ADC Virtual Appliance by using the Virtual Machine Manager
Configuring Citrix ADC Virtual Appliances to Use SR-IOV Network Interface
Configuring Citrix ADC Virtual Appliances to use PCI Passthrough Network Interface
Provisioning the Citrix ADC Virtual Appliance by using the virsh Program
Provisioning the Citrix ADC Virtual Appliance with SR-IOV, on OpenStack
Configuring a Citrix ADC VPX Instance on KVM to Use OVS DPDK-Based Host Interfaces
Deploy a Citrix ADC VPX instance on Microsoft Azure
Network architecture for Citrix ADC VPX instances on Microsoft Azure
Configure multiple IP addresses for a Citrix ADC VPX standalone instance
Configure a high-availability setup with multiple IP addresses and NICs
Configure a high-availability setup with multiple IP addresses and NICs by using PowerShell commands
Configure address pools (IIP) for a Citrix Gateway appliance
Upgrade and downgrade a Citrix ADC appliance
Authentication, authorization, and auditing application traffic
Configuring authentication, authorization, and auditing policies
Configuring Authentication, authorization, and auditing with commonly used protocols
Use an on-premises Citrix Gateway as the identity provider for Citrix Cloud
Troubleshoot authentication issues in Citrix ADC and Citrix Gateway with aaad.debug module
-
-
-
-
-
Persistence and persistent connections
Advanced load balancing settings
Gradually stepping up the load on a new service with virtual server–level slow start
Protect applications on protected servers against traffic surges
Retrieve location details from user IP address using geolocation database
Use source IP address of the client when connecting to the server
Use client source IP address for backend communication in a v4-v6 load balancing configuration
年代et a limit on number of requests per connection to the server
Configure automatic state transition based on percentage health of bound services
Use case 2: Configure rule based persistence based on a name-value pair in a TCP byte stream
Use case 3: Configure load balancing in direct server return mode
Use case 6: Configure load balancing in DSR mode for IPv6 networks by using the TOS field
Use case 7: Configure load balancing in DSR mode by using IP Over IP
Use case 10: Load balancing of intrusion detection system servers
Use case 11: Isolating network traffic using listen policies
Use case 12: Configure Citrix Virtual Desktops for load balancing
Use case 13: Configure Citrix Virtual Apps for load balancing
Use case 14: ShareFile wizard for load balancing Citrix ShareFile
-
-
-
-
-
Configuring a CloudBridge Connector Tunnel between two Datacenters
Configuring CloudBridge Connector between Datacenter and AWS Cloud
Configuring a CloudBridge Connector Tunnel Between a Datacenter and Azure Cloud
Configuring CloudBridge Connector Tunnel between Datacenter and SoftLayer Enterprise Cloud
Configuring a CloudBridge Connector Tunnel Between a Citrix ADC Appliance and Cisco IOS Device
CloudBridge Connector Tunnel Diagnostics and Troubleshooting
This content has been machine translated dynamically.
Dieser Inhalt ist eine maschinelle Übersetzung, die dynamisch erstellt wurde.(Haftungsausschluss)
Cet article a été traduit automatiquement de manière dynamique.(Clause de non responsabilité)
Este artículo lo ha traducido una máquina de forma dinámica.(Aviso legal)
此内容已经过机器动态翻译。放弃
このコンテンツは動的に機械翻訳されています。免責事項
이 콘텐츠는 동적으로 기계 번역되었습니다.책임 부인
Este texto foi traduzido automaticamente.(Aviso legal)
Questo contenuto è stato tradotto dinamicamente con traduzione automatica.(Esclusione di responsabilità))
This article has been machine translated.
Dieser Artikel wurde maschinell übersetzt.(Haftungsausschluss)
Ce article a été traduit automatiquement.(Clause de non responsabilité)
Este artículo ha sido traducido automáticamente.(Aviso legal)
この記事は機械翻訳されています.免責事項
이 기사는 기계 번역되었습니다.책임 부인
Este artigo foi traduzido automaticamente.(Aviso legal)
这篇文章已经过机器翻译.放弃
Questo articolo è stato tradotto automaticamente.(Esclusione di responsabilità))
Translation failed!
Configure service groups
Configuring a service group enables you to manage a group of services as easily as a single service. For example, if you enable or disable any option, such as compression, health monitoring or graceful shutdown, for a service group, the option gets enabled for all the members of the service group.
After creating a service group, you can bind it to a virtual server, and you can add services to the group. You can also bind monitors to service groups.
The members of a service group can be identified by IP address or server name.
Using domain-name based service (DBS) group members is advantageous because you need not reconfigure the member on the Citrix ADC appliance if the IP address of the member changes. The appliance automatically senses such changes through the configured name server. This feature is particularly useful in cloud scenarios, where the service provider can change a physical server or change the IP address for a service. If you specify a DBS group member, the appliance learns the IP address dynamically.
You can bind both IP-based and DBS members to the same service group.
Note: If you use DBS service group members, make sure that either a name server is specified or a DNS server is configured on the Citrix ADC appliance. A domain name will be resolved into an IP address only if the corresponding address record is present on the appliance or the name server.
Create service groups
You can configure up to 8192 service groups on the Citrix ADC appliance.
To create a service group by using the command line
At the command prompt, type:
add servicegroup
Example:
add servicegroup Service-Group-1 HTTP
To create a service group by using the configuration utility
Navigate toTrafficManagement>LoadBalancing>年代erviceGroups, and add a service group.
Bind a service group to a virtual server
When you bind a service group to a virtual server, the member services are bound to the virtual server.
To bind a service group to a virtual server by using the command line interface
At the command prompt, type:
bind lb vserver @
Example:
bind lb vserver Vserver-LB-1 Service-Group-1
To bind a service group to a virtual server by using the configuration utility
- Navigate toTrafficManagement>LoadBalancing>Virtual年代ervers, and open a virtual server.
- In Advanced Settings, select年代erviceGroups.
Bind a member to a service group
Adding services to a service group enables the service group to manage the servers. You can add the servers to a service group by specifying the IP addresses or the names of the servers.
In the configuration utility, if you want to add a domain-name based service group member, select Server Based.
With this option, you can add any server that has been assigned a name, regardless of whether the name is an IP address or a user-assigned name.
To add members to a service group by using the command line interface
To configure a service group, at the command prompt, type:
bind servicegroup (@ | )
Examples:
bind servicegroup Service-Group-1 10.102.29.30 80 bind servicegroup Service-Group-2 1000:0000:0000:0000:0005:0600:700a:888b 80 bind servicegroup CitrixEdu s1.citrite.net
To add members to a service group by using the configuration utility
Navigate to Traffic Management > Load Balancing > Service Groupsand open a service group.
Click in the Service Group section, and do one of the following:
- To add a new IP based service group member, select IP Based.
- To add a server-name based service group member, select Server Based.
If you want to add a domain-name based service group member, select年代erver Based. With this option, you can add any server that has been assigned a name, regardless of whether the name is an IP address or a user-assigned name.
If adding a new IP based member, in the IP Address text box, type the IP address. If the IP address uses IPv6 format, select the IPv6 check box and then enter the address in the IP Address text box
注意:您可以添加一个范围的IP地址。IPaddresses in the range must be consecutive. Specify the range by entering the starting IP address in the IP Address text box (for example, 10.102.29.30). Specify the end byte of the IP address range in the text box under Range (for example, 35). In the Port text box type the port (for example, 80), and then click Add.
Click Create.
Bind a monitor to a service group
When you create a service group, the default monitor of the type appropriate for the group is automatically bound to it. Monitors periodically probe the servers in the service group to which they are bound and update the state of the service groups.
You can bind a different monitor of your own choice to the service group.
To bind a monitor to a service group by using the command line interface
At the command prompt, type:
bind serviceGroup -monitorName -monState ( ENABLED | DISABLED)
Example:
bind serviceGroup Service-Group-1 -monitorName monitor-HTTP-1
To a bind monitor to a service group by using the configuration utility
- Navigate toTrafficManagement>LoadBalancing>年代erviceGroups.
- Open a service group and, in Advanced Settings, clickMonitors.
Retain the original state of a service group member after disabling and enabling a virtual server
From build 64.x, a new global option, –retainDisableServer, enables you to retain a service-group member’s state when a server is disabled and reenabled.
Previously, a member’s state would change from DISABLED to ENABLED under the following set of conditions:
- Two applications are deployed on the same port on a virtual server.
- Two service groups with a common member are bound to this virtual server, and the common member is enabled in one group and disabled in the other.
- The server is disabled and then reenabled.
Under these conditions, disabling the server disables all the service group members, and reenabling the server enables all the members, by default, regardless of their earlier states. To bring the members back to the original states, you must manually disable those member(s) in the service group. This is a cumbersome task and prone to errors.
年代hare
年代hare
This Preview product documentation is Citrix Confidential.
You agree to hold this documentation confidential pursuant to the terms of your Citrix Beta/Tech Preview Agreement.
The development, release and timing of any features or functionality described in the Preview documentation remains at our sole discretion and are subject to change without notice or consultation.
The documentation is for informational purposes only and is not a commitment, promise or legal obligation to deliver any material, code or functionality and should not be relied upon in making Citrix product purchase decisions.
If you do not agree, select Do Not Agree to exit.