Configuring a Citrix ADC Load Balancer by Using the Service Management Portal (Tenant Portal)

September 21, 2020

Contributed by:

In WAP, once the Tenant creates the Bridge Domain (BD), VRF, and a Network, the Tenant can configure Citrix ADC Load Balancer through the Service Management Portal (Tenant Portal).

To configure Citrix ADC Load Balancer in Service Management Portal (Tenant Portal)

1. Log on to the Service Management Portal (Tenant Portal).

2. Create a bridge domain and VRF, as follows:

a. In the navigation pane, selectACI.

b. ClickNEW.

c。NEWpane, selectBRIDGE DOMAIN.

localized image

d. In theBRIDGE DOMAINfield, enter the bridge domain name (for example, BD01).

e. (Optional) In theSUBNET’S GATEWAYfield, enter the subnet’s gateway (for example, 192.168.1.1/24).

f. In theVRFfield, select a VRF that is already part of the subscription or selectCreate Oneto create a VRF.

g. ClickCREATE.

3. Create a network and associate it with the bridge domain that you created. Do the following:

a. In the navigation pane, selectACI.

b. ClickNEW.

c。NEWpane, selectNETWORK.

localized image

d. In theNETWORK NAMEfield, enter the network name (for example, S01).

e. In theBRIDGE DOMAINdrop-down list, select the bridge domain you have created. (for example, BD01).

f. In the subnet’sGATEWAYfield, enter the subnet’s gateway address (for example, 172.23.2.1/24).

g. (Optional) In theDNS SERVER IP/IPSfield, enter the DNS server details.

h. ClickCREATE.

4. In theACIpane, selectNETWORKS.

localized image

5. Double-click the network that you have created. Then, in the network pane, selectEnable load balancer (public). In theIP ADDRESSfield, a VIP is automatically assigned from the VIP Range that the administrator configured in the Admin Portal. For more information, see [Creating a Citrix ADC Load Balancer to a Plan in Service Management Portal (Admin Portal)]. 6. Double-click the network that you have created. Then, in the network pane, selectEnable load balancer (public). In theIP ADDRESSfield, a VIP is automatically assigned from the VIP Range that the administrator configured in the Admin Portal. For more information, see [Creating a Citrix ADC Load Balancer to a Plan in Service Management Portal Admin Portal]

localized image

6. In the network pane, select theLoad Balancerstab, and clickADD.

localized image

7. In theADD NETWORK LOAD BALANCERpane, do the following:

a. In theNAMEfield, enter the name for the load balancer.

b. Optionally, in theVIRTUAL IP ADDRESSfield, assign the load balancer a VIP address from the VIP range that you defined earlier.

c. Optionally, in thePROTOCOLfield, selectTCP.

d. In thePORTfield, enter the port number.

8. ClickCREATE. The Citrix ADC Load Balancer is displayed in theLOAD BALANCERStab and the Citrix ADC Load Balancer is data path ready.

localized image

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Configuring a Citrix ADC Load Balancer by Using the Service Management Portal (Tenant Portal)

September 21, 2020

Contributed by:

September 21, 2020

Contributed by:

Configuring a Citrix ADC Load Balancer by Using the Service Management Portal (Tenant Portal)

In this article