Citrix ADC

Enabling AppQoE

To configure AppQoE, you must first enable the feature.

To enable AppQoE by using the command line

At the command prompt, type the following commands:

  • enable ns feature appqoe
  • show ns feature

Example:

> enable ns feature appqoe Done > show ns feature Feature Acronym Status ------- ------- ------ 1) Web Logging WL ON 2) Surge Protection SP ON 3) Load Balancing LB ON ... 1) AppQoE AppQoE ON Done 

To enable AppQoE by using the GUI

  1. Navigate toSystem>Settings.
  2. In the details pane, clickConfigure Advanced Features.
  3. In theConfigure Advanced Featuresdialog box, select theAppQoEcheck box.
  4. ClickOK.
Enabling AppQoE