反对figuring the VPN User Experience
How to Configure Full VPN Setup on a Citrix Gateway Appliance
AlwaysOn VPN before Windows logon (Formally AlwaysOn service)
Maintaining and Monitoring the System
Deploying with Citrix Endpoint Management, Citrix Virtual Apps, and Citrix Virtual Desktops
Accessing Citrix Virtual Apps and Desktops Resources with the Web Interface
Integrating Citrix Gateway with Citrix Virtual Apps and Desktops
反对figuring Additional Web Interface Settings on Citrix Gateway
反对figuring Web Interface Failover
反对figuring Access to Applications and Virtual Desktops in the Web Interface
Integrate Citrix Gateway with Citrix Virtual Apps and Desktops
反对figuring Settings for Your Citrix Endpoint Management Environment
反对figuring Load Balancing Servers for Citrix Endpoint Management
反对figuring Load Balancing Servers for Microsoft Exchange with Email Security Filtering
反对figuring Citrix Endpoint Management NetScaler Connector (XNC) ActiveSync Filtering
Allowing Access from Mobile Devices with Citrix Mobile Productivity Apps
反对figuring Domain and Security Token Authentication for Citrix Endpoint Management
反对figuring Client Certificate or Client Certificate and Domain Authentication
Citrix Gateway Enabled PCoIP Proxy Support for VMware Horizon View
Proxy Auto Configuration for Outbound Proxy support for Citrix Gateway
Integrate Citrix Gateway with Citrix Virtual Apps and Desktops
This content has been machine translated dynamically.
Dieser Inhalt ist eine maschinelle Übersetzung, die dynamisch erstellt wurde.(Haftungsausschluss)
Cet article a été traduit automatiquement de manière dynamique.(Clause de non responsabilité)
Este artículo lo ha traducido una máquina de forma dinámica.(Aviso legal)
此内容已动态机器翻译。放弃
このコンテンツは動的に機械翻訳されています。免責事項
This content has been machine translated dynamically.
This content has been machine translated dynamically.
This content has been machine translated dynamically.
This article has been machine translated.
Dieser Artikel wurde maschinell übersetzt.(Haftungsausschluss)
Ce article a été traduit automatiquement.(Clause de non responsabilité)
Este artículo ha sido traducido automáticamente.(Aviso legal)
この記事は機械翻訳されています.免責事項
이 기사는 기계 번역되었습니다.
埃斯特artigo信息自由traduzido automaticamente。
这篇文章已经过机器翻译.放弃
Translation failed!
反对figuring Web Interface Failover
You can use the Published Applications Wizard to configure Citrix Gateway to fail over to a secondary server running the Web Interface.
Web Interface failover allows user connections to stay active if the primary Web Interface fails. When you configure failover, you define a new IP address in addition to the system IP address, mapped IP address, or virtual server IP address. The new IP address must be on the same subnet as the system or mapped IP address.
When you configure Web Interface failover on Citrix Gateway, any network traffic that is sent to the new IP address is relayed to the primary Web Interface. The virtual server that you select in the Published Applications wizard serves as the network address translation (NAT) IP address. The real IP address is that of the Web Interface. If the primary Web Interface fails, network traffic is sent to the secondary Web Interface.
To configure Web Interface failover
- In the configuration utility, click the Configuration tab and then in the navigation pane, click Citrix Gateway.
- In the details pane, under Getting Started, click Published applications wizard.
- Click Next, select a virtual server and then click Next.
- On the Configure Client Connections page, click Configure Web Interface Failover.
- Under Primary Web Interface, in Web Interface Server, type the IP address of the primary Web Interface.
- In Web Interface Server Port, type the port number for the primary Web Interface.
- In Virtual Server IP, type the new IP address for failover.
- In Virtual Server Port, enter the port number for the virtual server.
- Under Backup Web Interface, in Web Interface Server, type the IP address of the server running the Web Interface or select a server from the list.
- In Web Interface Server Port, type the port number of the Web Interface and then click OK.
- Click Next and then follow the instructions to complete the wizard.
Share
Share
In this article
This Preview product documentation is Citrix Confidential.
You agree to hold this documentation confidential pursuant to the terms of your Citrix Beta/Tech Preview Agreement.
The development, release and timing of any features or functionality described in the Preview documentation remains at our sole discretion and are subject to change without notice or consultation.
文档信息的目的ly and is not a commitment, promise or legal obligation to deliver any material, code or functionality and should not be relied upon in making Citrix product purchase decisions.
If you do not agree, select Do Not Agree to exit.