Configuring the VPN User Experience
How to Configure Full VPN Setup on a Citrix Gateway Appliance
AlwaysOn VPN before Windows logon (Formally AlwaysOn service)
Maintaining and Monitoring the System
Deploying with Citrix Endpoint Management, Citrix Virtual Apps, and Citrix Virtual Desktops
Accessing Citrix Virtual Apps and Desktops Resources with the Web Interface
Integrating Citrix Gateway with Citrix Virtual Apps and Desktops
Configuring Additional Web Interface Settings on Citrix Gateway
Configuring Access to Applications and Virtual Desktops in the Web Interface
Integrate Citrix Gateway with Citrix Virtual Apps and Desktops
Configuring Settings for Your Citrix Endpoint Management Environment
Configuring Load Balancing Servers for Citrix Endpoint Management
Configuring Load Balancing Servers for Microsoft Exchange with Email Security Filtering
Configuring Citrix Endpoint Management NetScaler Connector (XNC) ActiveSync Filtering
Allowing Access from Mobile Devices with Citrix Mobile Productivity Apps
Configuring Domain and Security Token Authentication for Citrix Endpoint Management
Configuring Client Certificate or Client Certificate and Domain Authentication
Optimizing Network Traffic with CloudBridge
Citrix Gateway Enabled PCoIP Proxy Support for VMware Horizon View
Proxy Auto Configuration for Outbound Proxy support for Citrix Gateway
Integrate Citrix Gateway with Citrix Virtual Apps and Desktops
This content has been machine translated dynamically.
Dieser Inhalt ist eine maschinelle Übersetzung, die dynamisch erstellt wurde.(Haftungsausschluss)
Cet article a été traduit automatiquement de manière dynamique.(Clause de non responsabilité)
Este artículo lo ha traducido una máquina de forma dinámica.(Aviso legal)
此内容已动态机器翻译。放弃
このコンテンツは動的に機械翻訳されています。免責事項
This content has been machine translated dynamically.
This content has been machine translated dynamically.
This content has been machine translated dynamically.
This article has been machine translated.
Dieser Artikel wurde maschinell übersetzt.(Haftungsausschluss)
Ce article a été traduit automatiquement.(Clause de non responsabilité)
Este artículo ha sido traducido automáticamente.(Aviso legal)
この記事は機械翻訳されています.免責事項
이 기사는 기계 번역되었습니다.
Este artigo foi traduzido automaticamente.
这篇文章已经过机器翻译.放弃
Translation failed!
Optimizing network traffic with CloudBridge
When users log on with the Citrix Gateway plug-in, the connection can be optimized by using the CloudBridge plug-in, which installs on the user device from CloudBridge. When the connection is optimized through the use of the CloudBridge plug-in, network traffic is compressed and accelerated through Citrix Gateway. When CloudBridge is enabled for a connection, TCP compression policies on the Citrix Gateway are disabled.
The CloudBridge plug-in is deployed and works with the Citrix Gateway plug-in.
Citrix网关支持5.5和6.1版的e Repeater plug-in and Versions 6.2 and 7.0 of the CloudBridge plug-in.
CloudBridge optimization and flow control take precedence over Citrix Gateway optimization features that require dynamic content modification. If CloudBridge optimization is enabled for HTTP traffic, the following Citrix Gateway features are not available:
- Single sign-on to Web applications
- File type association
- HTTP authorization
To allow single sign-on to Web applications, you can disable acceleration on HTTP. To do so, you use the command line. Log on to the Citrix Gateway serial console and then at a command prompt, type:
add vpn trafficAction ssoact http -SSO ON
Network traffic destined for a configured HTTP port on Citrix Gateway is excluded automatically from CloudBridge optimization. This is the default setting. If you configure a traffic policy for CloudBridge optimization on an HTTP port, the traffic policy is honored and the network traffic is optimized by CloudBridge. However, the Citrix Gateway optimization features are disabled for all traffic affected by that policy. CloudBridge can accelerate network traffic destined for non-HTTP ports without affecting other Citrix Gateway features.
您使用交通政策来配置用户连接ions to use the CloudBridge plug-in. You can then bind the policy to users, groups, virtual servers, or globally. The policy is prioritized based on where you bind the policy or by the priority number you give the policy.
To create a traffic policy
- In the configuration utility, on the Configuration tab, in the navigation pane, expand Citrix Gateway Policies and then click Traffic.
- In the details pane, clickAdd.
- InNametype a name for the policy.
- Next to Request Profile, clickNew.
- InName, type a name for the profile.
- InBranch Repeater, selectONand then clickCreate.
- In theCreate Traffic Policydialog box, next toAdd Expression, select or enter an expression that represents the traffic types to enable CloudBridge acceleration clickAdd Expression, clickCreateand then clickClose.
When adding an expression, choose a network expression to use the same IP addresses and port ranges for which the CloudBridge is configured to accelerate. For CloudBridge acceleration to occur, the traffic types configured on Citrix Gateway must match the Service Class Policies configured on CloudBridge.
All TCP traffic benefits from CloudBridge acceleration. If you are planning to use single sign-on, do not accelerate HTTP traffic because the acceleration disables single sign-on.
Share
Share
In this article
This Preview product documentation is Citrix Confidential.
You agree to hold this documentation confidential pursuant to the terms of your Citrix Beta/Tech Preview Agreement.
The development, release and timing of any features or functionality described in the Preview documentation remains at our sole discretion and are subject to change without notice or consultation.
The documentation is for informational purposes only and is not a commitment, promise or legal obligation to deliver any material, code or functionality and should not be relied upon in making Citrix product purchase decisions.
If you do not agree, select Do Not Agree to exit.