Using the Status Tray on a target device
The Virtual Disk status tray provides device and product edition information on the target device. The purpose of this tool is to aid in the management and troubleshooting of virtual disks.
Note:
This tool is installed automatically during the installation process.
年代tarting the Virtual Disk status tray
To manually start the Virtual Disk Status tray, double-click on the年代tatus Trayicon in the System Tray. TheVirtual Disk Status Traydialog box appears.
Using the General tab
The following list describes each field on theGeneraltab.
vDisk Information:
年代tatus: Indicates the current state of the virtual disk. Values include:
Active (target device is accessing this virtual disk) Inactive (target device is not accessing this virtual disk)
年代erver: Indicates the IP address and port of the Provisioning Server providing access to the virtual disk.
Boot from: Indicates if this virtual disk is set to boot from a local hard drive or from a virtual disk.
Virtual Disk: Represents the name of the virtual disk accessed by the target device.
Mode: The current access mode for the virtual disk. Values include:
- Read only
- Read and write
Version:
Edition identifies the edition and provides version and server-pack information.
Build identifies the specific product build and compile date.
首选项:
在系统托盘提示状态消息:启用option if you want the virtual disk Status Tray to automatically start when the user logs into the target device.
年代how icon in system tray: To indicate connection status to the virtual disk, enable this option and the icon appears in your Windows system tray when this program runs.
Using the Statistics tab
The following list describes each field on the年代tatisticstab.
Boot Statistics:
Boot time: The number of seconds elapsed during the boot phases of the operating system. This value does not include the POST, BIOS, PXE, DHCP, or TFTP.
Retries: The number of packet retries that occurred during the boot phases.
Bytes Read: The total number of bytes read during the boot phases.
Bytes Written: The total number of bytes written during the boot phases.
Throughput: A value calculating the overall throughput of the software during the boot phases. Throughput = (Bytes Read + Bytes Written)/Boot Time (in seconds).
年代ession Statistics:
Uptime: The length of time the target device has been booted (HHHH:MM:SS)
Retries: The total number of retries.
Bytes Read: The total number of bytes read.
Bytes Written: The total number of bytes written.
Diagnostic Statistics:
Uptime: The length of time the target device has been booted (HHHH:MM:SS)
Retries: The total number of retries.
Bytes Read: The total number of bytes read.
Bytes Written: The total number of bytes written.
年代etting Virtual Disk status tray preferences
On theGeneral tabof theVirtual Disk Statusdialog, the tray can be configured to run automatically when the target device starts, or started manually. Choose to have the虚拟磁盘状态托盘icon appear in your system tray.
To configure the Virtual Disk Status Tray, choose from the following methods:
- Configure the tray to appear automatically as each target device starts.
- Add the虚拟磁盘状态托盘icon to your system tray.
Configuring the tray to appear automatically as each target device starts
- 年代tart the Virtual Disk Status Tray, and then select theGeneraltab.
- 年代electAutomatically start this programunder首选项. The tray starts automatically the next time the target device boots.
Adding the Virtual Disk status tray icon to your system tray
- 年代tart the Virtual Disk Status tray, and then select theGeneraltab.
- 年代elect the年代how icon in System Traycheck box under首选项. The虚拟磁盘状态托盘icon appears in your system tray the next time the target device boots.