Citrix ADC appliances in a high availability setup
You can configure a high availability (HA) setup on the Citrix ADC appliances with a Thales Luna HSM configuration in either of the following two ways:
- First, configure a Thales Luna HSM on the two nodes, using the same HSM and partition. Then create an HA pair. Finally, add the Citrix ADC configuration, such as keys, certificate-key pairs, and virtual servers, on the primary node.
- If a Thales Luna HSM is already configured on one node with the Citrix ADC configuration, add a similar configuration on the other node. Copy “/var/safenet/sfgw_ident_file” from the first node to the other and restart the safenet_gw binary. After the gateway is up and running, add the nodes in an HA setup.
Citrix ADC appliances in a high availability setup
In this article
Copied!
Failed!