Call Home support for Citrix ADC instances on an SDX appliance
The Call Home feature monitors your Citrix ADC instances for common error conditions. You can now configure, enable, or disable the Call Home feature on Citrix ADC instances from the Management Service user interface.
Note:The Citrix ADC instance must be registered with the Citrix Technical Support server before Call Home can upload the system data to the server when predefined error conditions occur on the appliance. Enabling the Call Home feature on the Citrix ADC instance initiates the registration process.
Enabling and Disabling Call Home on a Citrix ADC instance
You can enable the Call Home feature on a Citrix ADC instance from the Management Service. When you enable the Call Home feature, the Call Home process registers the Citrix ADC instance with the Citrix Technical Support server. The registration takes some time to complete. During that time, the Management Service displays the progress of registration.
To enable the Call Home feature, navigate toConfiguration > Citrix ADC > Call Home, select the Citrix ADC instance, and click the Enable button. In the confirmation page, click Yes.
To disable the Call Home feature, navigate toConfiguration > Citrix ADC > Call Home, select the Citrix ADC instance, and click the Disable button. On the confirmation page, click Yes.
If you enable Call Home, you can configure the following options:
- (Optional) Specify the administrator’s email address. The Call Home process sends the email address to the Support server, where it is stored for future correspondence regarding Call Home.
- (Optional) Enable Call Home proxy mode. Call Home can upload your Citrix ADC instance’s data to the Citrix TaaS server through a proxy server. To use this feature, enable it on your Citrix ADC instance and specify the IP address and port number of an HTTP proxy server. All traffic from the proxy server to the TaaS servers (over the Internet) is over SSL and encrypted, so data security and privacy are not compromised.
To configure Call Home on the Citrix ADC instance from the Management Service
You can configure the Call Home feature on a single instance or on multiple instances at the same time.
To configure the Call Home feature on a single Citrix ADC instance, navigate toConfiguration > Citrix ADC > Call Home, select the Citrix ADC instance, and click Configure button. In the Configure Call Home page, click OK.
To configure the Call Home feature on multiple Citrix ADC instances, navigate toConfiguration > Citrix ADC. In the right pane, click Call Home. On the Configure Call Home page, select the Citrix ADC instances from the Available Instances section, specify other details, and click OK.
Polling the Citrix ADC instances
To poll the Call Home feature from all Citrix ADC instances and view the current status, navigate toConfiguration > Citrix ADC > Call Home, and clickPoll Now. On the confirmation page, clickYes.