Configure and manage Citrix ADC instances
After you have provisioned Citrix ADC instances on your appliance, you are ready to configure and manage the instances. Begin by creating a subnet IP (SNIP) address and then saving the configuration. You can then perform basic management tasks on the instances. Check to see if you have to apply the administration configuration.
Warning:Make sure that you modify the provisioned network interfaces or VLANS of an instance using the Management Service instead of performing the modifications directly on the instance.
Create a SNIP address on a Citrix ADC instance
You can assign a SNIP address to the Citrix ADC instances after it is provisioned on the SDX appliance.
A SNIP is used in connection management and server monitoring. It is not mandatory to specify a SNIP when you initially configure the NetScaler SDX appliance. You can assign SNIP to the Citrix ADC instance from the Management Service.
To add a SNIP Address on a Citrix ADC instance
- On theConfigurationtab, in the navigation pane, clickCitrix ADC.
- In the details pane, underCitrix ADC Configuration, clickCreate IP.
- In theCreate Citrix ADC IPdialog box, specify values for the following parameters.
- IP Address:specify the IP address assigned as the SNIP address.
- Netmask:specify the subnet mask associated with the SNIP address.
- Type:By default the value is SNIP.
- Save Configuration:Select to save the configuration on the Citrix ADC. Default value is false.
- Instance IP Address:Specify the IP address of the Citrix ADC instance.
- ClickCreate, and then clickClose.
Save the configuration
You can save the running configuration of a Citrix ADC instance from the Management Service.
To save the configuration on a Citrix ADC instance
- On theConfigurationtab, in the navigation pane, clickCitrix ADC.
- In the details pane, underCitrix ADC Configuration, clickSave Configuration.
- In theSave Configurationdialog box, inInstance IP Address, select the IP addresses of the Citrix ADC instances whose configuration you want to save.
- ClickOK, and then clickClose.
Manage a Citrix ADC instance
The Management Service lets you perform the following operations on the Citrix ADC instances. You can perform these operations from theCitrix ADC instancespane in theConfigurationtab or from the Citrix ADC instances gadget on the Home page.
Start a Citrix ADC instance:Start any Citrix ADC instance from the Management Service user interface. When the Management Service UI forwards this request to the Management Service, it starts the Citrix ADC instance.
Shut down a Citrix ADC instance:Shut down any Citrix ADC instance from the Management Service user interface. When the Management Service UI forwards this request to the Management Service, it stops the Citrix ADC instance.
Reboot a Citrix ADC instance:Restart the Citrix ADC instance.
Delete a Citrix ADC instance:If you do not want to use a Citrix ADC instance, you can delete that instance by using the Management Service. Deleting an instance permanently removes the instance and its related details from the database of the SDX appliance.
To start, stop, delete, or restart a Citrix ADC instance
- On theConfigurationtab, in the navigation pane, clickCitrix ADC instances.
- Select the Citrix ADC instance on which you want to perform the operation, and then clickStartorShut DownorDeleteorReboot.
- In the Confirm message box, clickYes.
Remove Citrix ADC instance Files
You can remove any Citrix ADC instance files, such as XVAs, builds, documentation, SSL keys or SSL certificates, from the appliance.
To remove Citrix ADC instance files
- On theConfigurationtab, in the navigation pane, expandCitrix ADC Configuration, and then click the file that you want to remove.
- In the details pane, select the file name, and then clickDelete.
Apply the administration configuration
At the time of provisioning a VPX instance, the Management Service creates some policies, an instance administration (admin) profile, and other configuration on the VPX instance. If the Management Service fails to apply the admin configuration, you can explicitly push the configuration from the Management Service to the VPX instance. One reason for the failure might be that the Management Service and the VPX instance are on different subnetworks and the router is down. Another reason might be that both are on the same subnet but traffic has to pass through an external switch and one of the links is down.
To apply the admin configuration on a Citrix ADC instance
- On theConfigurationtab, in the navigation pane, clickCitrix ADC.
- In the details pane, underCitrix ADC Configuration, clickApply Admin Configuration.
- In theApply Admin Configurationdialog box, inInstance IP Address, select the IP address of the VPX instance on which you want to apply the admin configuration.
- ClickOK.