Configuring settings for high availability
To set up a high availability configuration, you create two nodes, each of which defines the other’s Citrix Gateway IP address as a remote node. You can start by logging on to one of the two Citrix ADC appliances that you want to configure for high availability and add a node. Specify the other appliance’s Citrix Gateway IP address as the address of the new node. Then, log on to the other appliance and add a node that has the Citrix Gateway IP address of the first appliance. An algorithm determines which node becomes primary and which becomes secondary.
Before you configure the appliances, add a high availability node. This node represents either the first or second Citrix Gateway in the high availability pair. To configure high availability, you first create the node and then you configure the high availability settings.
To add a high availability node
- In the configuration utility, on the Configuration tab, in the navigation pane, expandSystem > High Availability.
- In the details pane, on the Nodes tab, clickAdd.
- In theCreate HA Nodepage, in theRemote Node IP Addresstext box, type the NSIP address of the Citrix ADC that is to be added as the remote node. If the Citrix Gateway IP address is an IPv6 address, select theIPv6check box before entering the address.
- If you want to add the local node to the remote node automatically, select Configure remote system to participate in High Availability setup. If you do not select this option, you have to log in to the appliance represented by the remote node and add the node that you are currently configuring.
- Click to enableTurn off HA Monitor interfaces/channels that are down.
- If the remote appliance has a different user name and password, in Remote System Logon Credentials, click Login credentials for the remote system are different from the self-node.
- InUser Name, type the user name of the remote appliance.
- InPassword, type the password of the remote appliance.
- ClickOK.
To enable or disable the secondary node
You can disable or enable the secondary node only. When you disable a secondary node, it stops sending heartbeat messages to the primary node, and therefore the primary node can no longer check the status of the secondary node. When you enable a node, the node takes part in the high availability configuration.
- In the configuration utility, on the Configuration tab, in the navigation pane, expand System and then click High Availability.
- In the details pane, on the Nodes tab, select the local node and then click Open.
- In the HA Configure Node dialog box, in High Availability Status, select ENABLED (Do not participate in HA).
- Click OK. A message appears in the status bar, stating that the node has been configured successfully.
To configure settings for high availability
- In the configuration utility, on the Configuration tab, in the navigation pane, expandSystem > High Availability.
- In the details pane, on the Nodes tab, select a node, and then clickEdit.
- In theHA Configure Nodedialog box, in ID, type the number of the node identifier. ID specifies the unique node number for the other appliance.
- InIP Address, type the system IP address and then click OK. The IP Address specifies the IP address of the other appliance.
Note: The maximum ID for nodes in a high availability pair is 64.