Citrix Gateway

反对figuring RSA SecurID Authentication

When configuring the RSA/ACE server for RSA SecureID authentication, you need to complete the following steps:

反对figure the RADIUS client with the following information:

  • Provide the name of the Citrix Gateway appliance.
  • Provide a description (not mandatory).
  • Provide the system IP address.
  • Provide the shared secret between Citrix Gateway and the RADIUS server.
  • 反对figure the make/model as Standard RADIUS.

In the agent host configuration, you need the following information:

  • Provide the fully qualified domain name (FQDN) of Citrix Gateway (as it appears on the certificate bound to the virtual server). After providing the FQDN, click the Tab key and the Network Address window populates itself.

    After you enter the FQDN, the network address automatically appears. If it does not, enter the system IP address.

  • Provide the Agent Type by using Communication Server.

  • 反对figure to import all users or a set of users who are allowed to authenticate through Citrix Gateway.

If it is not already configured, create an Agent Host entry for the RADIUS server, including the following information:

  • Provide the FQDN of the RSA server.

    After you enter the FQDN, the network address automatically appears. If it does not, provide the IP address of the RSA server.

  • Provide the Agent Type, which is the RADIUS server.

For more information about configuring an RSA RADIUS server, see the manufacturer’s documentation.

配置RSA SecurID,创建一个身份验证profile and policy and then bind the policy globally or to a virtual server. To create a RADIUS policy to use RSA SecurID, see反对figuring RADIUS Authentication.

After creating the authentication policy, bind it to a virtual server or globally. For more information, seeBinding Authentication Policies.

反对figuring RSA SecurID Authentication

In this article