Getting Started with NetScaler
Deploy a NetScaler VPX instance
Optimize NetScaler VPX performance on VMware ESX, Linux KVM, and Citrix Hypervisors
Apply NetScaler VPX configurations at the first boot of the NetScaler appliance in cloud
Install a NetScaler VPX instance on Microsoft Hyper-V servers
Install a NetScaler VPX instance on Linux-KVM platform
Prerequisites for installing NetScaler VPX virtual appliances on Linux-KVM platform
Provisioning the NetScaler virtual appliance by using OpenStack
Provisioning the NetScaler virtual appliance by using the Virtual Machine Manager
Configuring NetScaler virtual appliances to use SR-IOV network interface
Configuring NetScaler virtual appliances to use PCI Passthrough network interface
Provisioning the NetScaler virtual appliance by using the virsh Program
Provisioning the NetScaler virtual appliance with SR-IOV on OpenStack
Configuring a NetScaler VPX instance on KVM to use OVS DPDK-Based host interfaces
Deploy a NetScaler VPX instance on AWS
Deploy a VPX high-availability pair with elastic IP addresses across different AWS zones
Deploy a VPX high-availability pair with private IP addresses across different AWS zones
Protect AWS API Gateway using the NetScaler Web Application Firewall
Configure a NetScaler VPX instance to use Enhanced Networking with AWS ENA
Deploy a NetScaler VPX instance on Microsoft Azure
Network architecture for NetScaler VPX instances on Microsoft Azure
Configure multiple IP addresses for a NetScaler VPX standalone instance
Configure a high-availability setup with multiple IP addresses and NICs
Configure a high-availability setup with multiple IP addresses and NICs by using PowerShell commands
Deploy a NetScaler high-availability pair on Azure with ALB in the floating IP-disabled mode
Configure a NetScaler VPX instance to use Azure accelerated networking
Configure HA-INC nodes by using the NetScaler high availability template with Azure ILB
Configure a high-availability setup with Azure external and internal load balancers simultaneously
Configure a NetScaler VPX standalone instance on Azure VMware solution
Configure a NetScaler VPX high availability setup on Azure VMware solution
Deploy NetScaler GSLB and domain-based services back-end autoscale with cloud load balancer
Configure address pools (IIP) for a NetScaler Gateway appliance
Deploy a NetScaler VPX instance on Google Cloud Platform
Deploy a VPX high-availability pair on Google Cloud Platform
Deploy a VPX high-availability pair with external static IP address on Google Cloud Platform
Deploy a single NIC VPX high-availability pair with private IP address on Google Cloud Platform
Deploy a VPX high-availability pair with private IP addresses on Google Cloud Platform
Install a NetScaler VPX instance on Google Cloud VMware Engine
Solutions for Telecom Service Providers
Load Balance Control-Plane Traffic that is based on Diameter, SIP, and SMPP Protocols
Provide Subscriber Load Distribution Using GSLB Across Core-Networks of a Telecom Service Provider
Authentication, authorization, and auditing application traffic
Basic components of authentication, authorization, and auditing configuration
On-premises NetScaler Gateway as an identity provider to Citrix Cloud
Authentication, authorization, and auditing configuration for commonly used protocols
Troubleshoot authentication and authorization related issues
-
-
-
-
Persistence and persistent connections
Advanced load balancing settings
Gradually stepping up the load on a new service with virtual server–level slow start
Protect applications on protected servers against traffic surges
Retrieve location details from user IP address using geolocation database
Use source IP address of the client when connecting to the server
Use client source IP address for backend communication in a v4-v6 load balancing configuration
Set a limit on number of requests per connection to the server
Configure automatic state transition based on percentage health of bound services
Use case 2: Configure rule based persistence based on a name-value pair in a TCP byte stream
Use case 3: Configure load balancing in direct server return mode
Use case 6: Configure load balancing in DSR mode for IPv6 networks by using the TOS field
Use case 7: Configure load balancing in DSR mode by using IP Over IP
Use case 11: Isolating network traffic using listen policies
Use case 12: Configure Citrix Virtual Desktops for load balancing
Use case 13: Configure Citrix Virtual Apps and Desktops for load balancing
Use case 14: ShareFile wizard for load balancing Citrix ShareFile
Use case 15: Configure layer 4 load balancing on the NetScaler appliance
-
-
Authentication and authorization for System Users
-
Configuring a CloudBridge Connector Tunnel between two Datacenters
Configuring CloudBridge Connector between Datacenter and AWS Cloud
Configuring a CloudBridge Connector Tunnel Between a Datacenter and Azure Cloud
Configuring CloudBridge Connector Tunnel between Datacenter and SoftLayer Enterprise Cloud
Configuring a CloudBridge Connector Tunnel Between a NetScaler Appliance and Cisco IOS Device
CloudBridge Connector Tunnel Diagnostics and Troubleshooting
This content has been machine translated dynamically.
Dieser Inhalt ist eine maschinelle Übersetzung, die dynamisch erstellt wurde.(Haftungsausschluss)
Cet article a été traduit automatiquement de manière dynamique.(Clause de non responsabilité)
Este artículo lo ha traducido una máquina de forma dinámica.(Aviso legal)
此内容已经过机器动态翻译。放弃
このコンテンツは動的に機械翻訳されています。免責事項
이 콘텐츠는 동적으로 기계 번역되었습니다.책임 부인
Este texto foi traduzido automaticamente.(Aviso legal)
Questo contenuto è stato tradotto dinamicamente con traduzione automatica.(Esclusione di responsabilità))
This article has been machine translated.
Dieser Artikel wurde maschinell übersetzt.(Haftungsausschluss)
Ce article a été traduit automatiquement.(Clause de non responsabilité)
Este artículo ha sido traducido automáticamente.(Aviso legal)
この記事は機械翻訳されています.免責事項
이 기사는 기계 번역되었습니다.책임 부인
Este artigo foi traduzido automaticamente.(Aviso legal)
这篇文章已经过机器翻译.放弃
Questo articolo è stato tradotto automaticamente.(Esclusione di responsabilità))
Translation failed!
Install a NetScaler VPX instance on Microsoft Hyper-V server
To install NetScaler VPX instances on Microsoft Windows Server, you must first install Windows Server with the Hyper-V role enabled, on a machine with adequate system resources. While installing the Hyper-V role, be sure to specify the NICs on the server that Hyper-V uses to create the virtual networks. You can reserve some NICs for the host. Use Hyper-V Manager to perform the NetScaler VPX instance installation.
The NetScaler VPX instance for Hyper-V is delivered in virtual hard disk (VHD) format. It includes the default configuration for elements such as CPU, network interfaces, and hard-disk size and format. After you install NetScaler VPX instance, you can configure the network adapters on a virtual appliance, add virtual NICs, and then assign the NetScaler IP address, subnet mask, and gateway, and complete the basic configuration of the virtual appliance.
After the initial configuration of the VPX instance, if you want to upgrade the appliance to the latest software release, seeUpgrade a NetScaler VPX standalone appliance
Note
Intermediate System-to-Intermediate System (ISIS) protocol is not supported on the NetScaler VPX virtual appliance hosted on the HyperV-2012 platform.
Prerequisites for installing NetScaler VPX instance on Microsoft servers
Before you begin installing a virtual appliance, do the following:
- Enable the Hyper-V role on Windows Servers. For more information, seehttp://technet.microsoft.com/en-us/library/ee344837(WS.10).aspx.
- Download the virtual appliance setup files.
- Get NetScaler VPX instance license files. For more information about NetScaler VPX instance licenses, see theNetScaler VPX Licensing Guideathttp://support.citrix.com/article/ctx131110.
Microsoft server hardware requirements
The following table describes the minimum system requirements for Microsoft servers.
Table 1. Minimum system requirements for Microsoft servers
Component | Requirement |
---|---|
CPU | 1.4 GHz 64-bit processor |
RAM | 8 GB |
Disk Space | 32 GB or greater |
The following table lists the virtual computing resources for each NetScaler VPX instance.
Table 2. Minimum virtual computing resources required for running a NetScaler VPX instance
Component | Requirement |
---|---|
RAM | 4 GB |
Virtual CPU | 2 |
Disk Space | 20 GB |
Virtual Network Interfaces | 1 |
Download the NetScaler VPX setup files
The NetScaler VPX instance for Hyper-V is delivered in virtual hard disk (VHD) format. You can download the files from the Citrix website. You need a Citrix account to log in. If you do not have a Citrix account, access the home page athttp://www.citrix.com, clickSign In > My account > Create Citrix Account, and follow the instructions to create a Citrix account.
To download the NetScaler VPX instance setup files, follow these steps:
In a web browser, go tohttp://www.citrix.com/.
Sign in with your user name and password.
ClickDownloads.
InSelect a Productdrop-down menu, selectNetScaler (NetScaler ADC).
UnderNetScaler Release X.X > Virtual Appliances, clickNetScaler VPX Release X.X
Download the compressed file to your server.
Install the NetScaler VPX instance on Microsoft servers
After you have enabled the Hyper-V role on Microsoft Server and extracted the virtual appliance files, you can use Hyper-V Manager to install NetScaler VPX instance. After you import the virtual machine, you need to configure the virtual NICs by associating them to the virtual networks created by Hyper-V.
You can configure a maximum of eight virtual NICs. Even if the physical NIC is DOWN, the virtual appliance assumes that the virtual NIC is UP, because it can still communicate with the other virtual appliances on the same host (server).
Note
You cannot change any settings while the virtual appliance is running. Shut down the virtual appliance and then make changes.
To install NetScaler VPX instance on Microsoft Server by using Hyper-V Manager:
- To start Hyper-V Manager, clickStart, point toAdministrative Tools, and then clickHyper-V Manager.
- In the navigation pane, underHyper-V Manager, select the server on which you want to install NetScaler VPX instance.
- On theActionmenu, clickImport Virtual Machine.
- In theImport Virtual Machinedialog box, inLocation, specify the path of the folder that contains the NetScaler VPX instance software files, and then selectCopy the virtual machine (create a new unique ID). This folder is the parent folder that contains the Snapshots, Virtual Hard Disks, and Virtual Machines folders.
- Note: If you received a compressed file, make sure that you extract the files into a folder before you specify the path to the folder.
- ClickImport.
- Verify that the virtual appliance that you imported is listed underVirtual Machines.
- To install another virtual appliance, repeat steps2through6.
Important
Make sure that you extract the files to a different folder in step4.
Auto-provision a NetScaler VPX instance on Hyper-V
Auto-provisioning of NetScaler VPX instance is optional. If auto-provisioning is not done, the virtual appliance provides an option to configure the IP address and so on.
To auto-provision NetScaler VPX instance on Hyper-V, follow these steps.
Create an ISO9660 compliant ISO image using the xml file as depicted in the example. Make sure that the name of the xml file isuserdata.
You can create an ISO file from XML file using:
• Any image processing tool such as PowerISO.
•
mkisofs
command in Linux.HYPER-V 2013.1 CITRIX en Copy the ISO image to hyper-v server.
Select the virtual appliance that you imported, and then on theActionmenu, selectSettings. You can also select the virtual appliance and then right click and selectSettings. TheSettingswindow for the selected virtual appliance is displayed.
In theSettingswindow, under the hardware section, clickIDE Controller.
In the right window pane, selectDVD Driveand clickAdd. The DVD Drive is added under theIDE Controllersection in the left window pane.
Select theDVD Driveadded in step 5. In the right window pane, select theImage file radiobutton and clickBrowseand select the ISO image that you copied on Hyper-V server, in step 2.
ClickApply.
Note
The virtual appliance instance comes up in the default IP address, when:
- The DVD drive is attached and the ISO file is not provided.
- The ISO file does not include the user data file.
- The user data file name or format is not correct.
To configure virtual NICs on the NetScaler VPX instance, follow these steps:
- Select the virtual appliance that you imported, and then on theActionmenu, selectSettings.
- In theSettings for
dialog box, clickAdd Hardwarein the left pane. - In the right pane, from the list of devices, selectNetwork Adapter.
- ClickAdd.
- Verify thatNetwork Adapter (not connected)appears in the left pane.
- Select the network adapter in the left pane.
- In the right pane, from theNetworkmenu, select the virtual network to connect the adapter to.
- To select the virtual network for other network adapters that you want to use, repeat steps6and7.
- ClickApply, and then clickOK.
To configure the NetScaler VPX instance:
- Right-click the virtual appliance that you previously installed, and then selectStart.
- Access the console by double-clicking the virtual appliance.
- Type the NetScaler IP address, subnet mask, and gateway for your virtual appliance.
You have completed the basic configuration of your virtual appliance. Type the IP address in a Web browser to access the virtual appliance.
Note
You can also use virtual machine (VM) template to provision NetScaler VPX instance using SCVMM.
如果您使用微软hyper - v NIC合作解决方案with NetScaler VPX instances, see articleCTX224494for more information.
Share
Share
This Preview product documentation is Citrix Confidential.
你同意这个文档保密pursuant to the terms of your Citrix Beta/Tech Preview Agreement.
The development, release and timing of any features or functionality described in the Preview documentation remains at our sole discretion and are subject to change without notice or consultation.
The documentation is for informational purposes only and is not a commitment, promise or legal obligation to deliver any material, code or functionality and should not be relied upon in making Citrix product purchase decisions.
If you do not agree, select Do Not Agree to exit.