Policy configuration for HTTP/3 traffic
HTTP/3 uses QUIC transport which is based on UDP. If you had policy expression defined for the HTTP or SSL virtual server that includes TCP policy expressions, it can no longer be used with a HTTP_QUIC virtual server. All other policies that do not have TCP or classic expressions can be bound with a HTTP_QUIC virtual server. For the policies to take effect, you must ensure that the feature policies are bound to the newly added global bind points as per the following.
- HTTPQUIC_REQ_DEFAULT
- HTTPQUIC_REQ_OVERRIDE
- HTTPQUIC_RES_DEFAULT
- HTTPQUIC_RES_OVERRIDE
Or, the policies can be bound to specific virtual server bind points:
- REQUEST
- RESPONSE
For more information, seeBind policy using advanced policy infrastructuretopic.
Following are the policies supported for HTTP over QUIC configuration:
- Responder
- Rewrite
- HTTP Compression
- Integrated Caching
- Web Application Firewall
- URL转换
- SSL
- Front end optimization (FEO)
- AppQoE
Responder policy configuration for HTTP/3 traffic
HTTP over QUIC type virtual servers have responder policy support. However, as QUIC uses UDP as its transport mechanism, TCP based expressions are excluded and UDP based expressions are included.
New or existing policy configurations with TCP expressions cannot be bound to HTTP/3 QUIC virtual servers or HTTP over QUIC global bind points. Instead of TCP expressions, UDP expressions can be included in the policy configurations that are bound to HTTP/3 QUIC virtual servers or HTTP over QUIC bind points.
Add responder action for redirecting URLs
To add a responder action, at the command prompt, type:
add responder action ( | ) [-comment ] [-responseStatusCode ] [-reasonPhrase ] [-headers ...]
Example:
add responder action redirectURL redirect "\"https://www.citrix.com/\""
Add responder policy
To add a responder policy, at the command prompt, type:
add responder policy [] [-comment ] [-logAction ] [-appflowAction ]
Example:
add responder policy res-pol "CLIENT.IP.SRC.IN_SUBNET(10.10.10.10/32)" redirectURL
Add responder policy based UDP expression
To add a responder policy based UDP expression, at the command prompt, type:
add responder policy [] [-comment ] [-logAction ] [-appflowAction ]
Example:
add responder policy redirectCitrixUdp "CLIENT.UDP.DSTPORT.EQ(443)" redirectURL
Bind responder policy based UDP expression with HTTP/3 QUIC based load balancing virtual server
To bind a responder policy based UDP expression to a load balancing virtual server, at the command prompt, type:
bind lb vserver @ ((@ [-weight ] ) | @ | (-policyName @ [-priority ] [-gotoPriorityExpression ] [-type ] [-invoke ( ) ] ) | -analyticsProfile @)
Example:
bind lb vserver lb-http3 -policyName redirectCitrixUdp -priority 9 -gotoPriorityExpression END -type REQUEST
Bind responder policy with HTTP/3 QUIC based load balancing virtual server
To bind a responder policy to a load balancing virtual server, at the command prompt, type:
bind lb vserver @ ((@ [-weight ] ) | @ | (-policyName @ [-priority ] [-gotoPriorityExpression ] [-type ] [-invoke ( ) ] ) | -analyticsProfile @)
Example:
bind lb vserver lb-http3 -policyName redirectCitrixUdp -priority 10 -gotoPriorityExpression END -type REQUEST
Bind responder policy to HTTP/3 global bind point
To bind a responder policy with the HTTP/3 global bind point, at the command prompt, type:
bind responder global [] [-type ] [-invoke ( ) ] bind responder global redirectCitrixUdp 3 -type HTTPQUIC_REQ_DEFAULT
Example:
bind responder global redirectCitrixUdp 3 -type HTTPQUIC_REQ_DEFAULT
Note:
For more information, seeResponder policy documentation.
Rewrite policy configuration for HTTP/3 traffic
HTTP over QUIC type virtual servers have rewrite policy support. However, as QUIC uses UDP as its transport mechanism, TCP based expressions are excluded and UDP based expressions are included.
New or existing policy configurations with TCP expressions cannot be bound to HTTP/3 virtual servers or to the newly added HTTP/3 global bind points. Instead of TCP expressions, UDP expressions can be included in the policy configurations that are bound to HTTP/3 QUIC virtual servers or HTTP over QUIC bind points.
Following are the configuration steps to configure the rewrite policy for HTTP3 over QUIC.
Add rewrite action for HTTP over QUIC
To add rewrite action, at the command prompt, type:
add rewrite action [] [-pattern | -search ] [-refineSearch ] [-comment ]
Example:
add rewrite action http3-altsvc-action insert_http_header Alt-Svc q/"h3-29=\":443\"; ma=3600; persist=1"/
Add rewrite policy for HTTP over QUIC
To add a write action, at the command prompt, type:
add rewrite policy [] [-comment ] [-logAction ]
Example:
add rewrite policy http3-altsvc-policy true http3-altsvc-action
Bind rewrite policy to load balancing virtual server of type HTTP/3_QUIC
To bind rewrite policy to the load balancing virtual server, at the command prompt, type:
bind lb vserver @ ((@ [-weight ] ) | @ | (-policyName @ [-priority ] [-gotoPriorityExpression ] [-type ] [-invoke ( ) ] ) | -analyticsProfile @)
Example:
bind lb vserver lb-http3 -policyName http3-altsvc-policy -priority 10 -type RESPONSE
Bind rewrite policy to HTTP/3 global bind point
To bind a responder policy with HTTP/3 global bind point, at the command prompt, type: bind rewrite global [] [-type ] [-invoke ( )]
Example:
bind rewrite global http3-altsvc-policy 3 -type HTTPQUIC_RES_DEFAULT
Note:
For more information, seeRewrite policy documentation.
Compression policy configuration for HTTP/3 traffic
When the Citrix ADC receives an HTTP response from a server, it evaluates the built-in compression policies and any custom compression policies to determine whether to compress the response and, if so, the type of compression to apply. Priorities assigned to the policies determine the order in which the policies are matched against the requests. HTTP over QUIC type virtual servers have compression policy support. However, as QUIC uses UDP as its transport mechanism, TCP based expressions are excluded and UDP based expressions are included. New or existing policy configurations with TCP expressions cannot be bound to HTTP/3 virtual servers or to the newly added HTTP/3 global bind points. Instead of TCP expressions, UDP expressions can be included in the policy configurations that are bound to HTTP/3 QUIC virtual servers or HTTP over QUIC bind points.
Add compression policy
To add compression policy, at the command prompt, type:
添加cmp policy -rule -resAction
Example:
添加cmp policy udp_port_cmp_policy -rule "CLIENT.UDP.DSTPORT.EQ(443)" -resAction COMPRESS
Bind compression policy with load balancing virtual server of type HTTP/3_QUIC
To bind URL transformation policy with load balancing virtual server of type HTTP/3_QUIC, at the command prompt, type:
bind lb vserver @ ((@ [-weight ] ) | @ | (-policyName @ [-priority ] [-gotoPriorityExpression ] [-type ( REQUEST | RESPONSE )] [-invoke ( ) ] ) | -analyticsProfile @)
Example:
bind lb vserver lb-http3 -policyName udp_port_cmp_policy -priority 10 -type RESPONSE
Bind compression global to HTTP/3 global bind point
To bind a compression policy with the HTTP/3 global bind point, at the command prompt, type:
bind compression global [] [-type ] [-invoke ( ) ] bind responder global redirectCitrixUdp 3 -type HTTPQUIC_REQ_DEFAULT
Example:
bind cmp global udp_port_cmp_policy -priority 100 -type HTTPQUIC_RES_DEFAULT Global built-in compression policies
工程r you upgrade your appliance to Citrix ADC release 13.0 build 82.x, the following compression policies will be automatically bound to the HTTP/3 default bind point.
> sho cmp global -type HTTPQUIC_RES_DEFAULT Policy Name: ns_adv_nocmp_xml_ie Priority: 8700 GotoPriorityExpression: END Type: HTTPQUIC_RES_DEFAULT Policy Name: ns_adv_nocmp_mozilla_47 Priority: 8800 GotoPriorityExpression: END Type: HTTPQUIC_RES_DEFAULT Policy Name: ns_adv_cmp_mscss Priority: 8900 GotoPriorityExpression: END Type: HTTPQUIC_RES_DEFAULT Policy Name: ns_adv_cmp_msapp Priority: 9000 GotoPriorityExpression: END Type: HTTPQUIC_RES_DEFAULT Policy Name: ns_adv_cmp_content_type Priority: 10000 GotoPriorityExpression: END Type: HTTPQUIC_RES_DEFAULT
If not bound, the following commands can be configured through the command prompt and you can configuration on your appliance.
bind cmp global ns_adv_nocmp_xml_ie -priority 8700 -gotoPriorityExpression END -type HTTPQUIC_RES_DEFAULT
bind cmp global ns_adv_nocmp_mozilla_47 -priority 8800 -gotoPriorityExpression END -type HTTPQUIC_RES_DEFAULT
bind cmp global ns_adv_cmp_mscss -priority 8900 -gotoPriorityExpression END -type HTTPQUIC_RES_DEFAULT
bind cmp global ns_adv_cmp_msapp -priority 9000 -gotoPriorityExpression END -type HTTPQUIC_RES_DEFAULT
bind cmp global ns_adv_cmp_content_type -priority 10000 -gotoPriorityExpression END -type HTTPQUIC_RES_DEFAULT
For more information, seeCompression policy configuration.
Caching policy configuration for HTTP/3 traffic
The integrated cache provides in-memory storage on the Citrix ADC appliance and serves Web content to users without requiring a round trip to an origin server. For static content, the integrated cache requires little initial setup. After you enable the integrated cache feature and perform basic setup (for example, determining the amount of Citrix ADC appliance memory the cache is permitted to use), the integrated cache uses built-in policies to store and serve specific types of static content, including simple webpages and image files. You can also configure the integrated cache to store and serve dynamic content that is marked as non-cacheable by Web and application servers (for example, database records and stock quotes). HTTP over QUIC type virtual servers have cache policy support. However, as QUIC uses UDP as its transport mechanism, TCP based expressions are excluded and UDP based expressions are included.
New or existing policy configurations with TCP expressions cannot be bound to HTTP/3 virtual servers or to the newly added HTTP/3 global bind points. Instead of TCP expressions, UDP expressions can be included in the policy configurations that are bound to HTTP/3 QUIC virtual servers or HTTP over QUIC bind points.
Add cache content group
To add the cache content group, at the command prompt, type:
添加cache contentGroup [-weakPosRelExpiry | -relExpiry | -relExpiryMilliSec | -absExpiry ... | -absExpiryGMT ...] [-heurExpiryParam ] [-weakNegRelExpiry ] [-maxResSize ] [-memLimit ]…
Example::
添加cache contentGroup DEFAULT -maxResSize 500
Add cache policy
To add cache policy, at the command prompt, type:
添加cache policy -rule -action [-storeInGroup ] [-invalGroups ...] [-invalObjects ...] [-undefAction ( NOCACHE | RESET )] add cache policy [-comment ] [-logAction ]
Example:
添加cache policy ctx_doc_pdf -rule "HTTP.REQ.URL.ENDSWITH(\".pdf\")" -action CACHE -storeInGroup DEFAULT
Bind cache policy with load balancing virtual server of type HTTP/3_QUIC
To bind cache policy with load balancing virtual server of type HTTP/3_QUIC, at the command prompt, type:
bind lb vserver @ ((@ [-weight ] ) | @ | (-policyName @ [-priority ] [-gotoPriorityExpression ] [-type ( REQUEST | RESPONSE )] [-invoke ( ) ] ) | -analyticsProfile @)
Example:
bind lb vserver lb-http3 -policyName ctx_doc_pdf -priority 100 -type REQUEST
Bind cache policy global to HTTP/3 global bind point
To bind a cache policy HTTP/3 global bind point:
bind cache global -priority [-gotoPriorityExpression ] [-type ] [-invoke ( ) ]
Example:
bind cache global ctx_doc_pdf -priority 3 -type HTTPQUIC_REQ_DEFAULT
For more information, seeIntegrated cache policy configuration.
Global built-in cache policies
工程r you upgrade your appliance to Citrix ADC release 13.0 build 82.x, the following cache policies will be automatically bound to the HTTP/3 default bind point.
On upgrade to the 13.0 82.x release, the following cache policies are automatically bound to the HTTP/3 default bind point.
> sho cache global -type HTTPQUIC_REQ_DEFAULT 1) Policy Name: NOPOLICY Priority: 185883 GotoPriorityExpression: USE_INVOCATION_RESULT Invoke type: policylabel Invoke name: _httpquicReqBuiltinDefaults Global bindpoint: HTTPQUIC_REQ_DEFAULT Done > sho cache global -type HTTPQUIC_RES_DEFAULT 1) Policy Name: NOPOLICY Priority: 185883 GotoPriorityExpression: USE_INVOCATION_RESULT Invoke type: policylabel Invoke name: _httpquicResBuiltinDefaults Global bindpoint: HTTPQUIC_RES_DEFAULT
工程r an upgrade, if the policies are not bound, you can use the following commands to manually bind and save the configuration.
添加cache policylabel _httpquicReqBuiltinDefaults -evaluates HTTPQUIC_REQ add cache policylabel _httpquicResBuiltinDefaults -evaluates HTTPQUIC_RES bind cache policylabel _httpquicReqBuiltinDefaults -policyName _nonGetReq -priority 100 bind cache policylabel _httpquicReqBuiltinDefaults -policyName _advancedConditionalReq -priority 200 bind cache policylabel _httpquicReqBuiltinDefaults -policyName _personalizedReq -priority 300 bind cache policylabel _httpquicResBuiltinDefaults -policyName _uncacheableStatusRes -priority 100 bind cache policylabel _httpquicResBuiltinDefaults -policyName _uncacheableVaryRes -priority 200 bind cache policylabel _httpquicResBuiltinDefaults -policyName _uncacheableCacheControlRes -priority 300 bind cache policylabel _httpquicResBuiltinDefaults -policyName _cacheableCacheControlRes -priority 400 bind cache policylabel _httpquicResBuiltinDefaults -policyName _uncacheablePragmaRes -priority 500 bind cache policylabel _httpquicResBuiltinDefaults -policyName _cacheableExpiryRes -priority 600 bind cache policylabel _httpquicResBuiltinDefaults -policyName _imageRes -priority 700 bind cache policylabel _httpquicResBuiltinDefaults -policyName _personalizedRes -priority 800 bind cache global NOPOLICY -priority 185883 -gotoPriorityExpression USE_INVOCATION_RESULT -type HTTPQUIC_REQ_DEFAULT -invoke policylabel _httpquicReqBuiltinDefaults bind cache global NOPOLICY -priority 185883 -gotoPriorityExpression USE_INVOCATION_RESULT -type HTTPQUIC_RES_DEFAULT -invoke policylabel _httpquicResBuiltinDefaults
Note:
The first two commands in the list of commands, and the last two commands in the same list, are included for the sake of completeness. You might encounter an error when running the four commands, since the commands are already run at the time of appliance restart. But you can ignore these errors.
URL Transformation policy configuration for HTTP/3 traffic
The URL transformation modifies all URLs in designated requests from an external version seen by outside users to an internal URL seen only by your Web servers and administrators. You can redirect user requests seamlessly, without exposing your network structure to users. You can also modify complex internal URLs that users might find difficult to remember into simpler, more easily remembered external URLs. HTTP over QUIC type virtual servers have cache policy support. However, as QUIC uses UDP as its transport mechanism, TCP based expressions are excluded and UDP based expressions are included. New or existing policy configurations with TCP expressions cannot be bound to HTTP/3 virtual servers or to the newly added HTTP/3 global bind points. Instead of TCP expressions, UDP expressions can be included in the policy configurations that are bound to HTTP/3 QUIC virtual servers or HTTP over QUIC bind points.
Add URL Transform profile
To add a URL transformation profile, at the command prompt, type:
add transform profile [-type URL]
Example:
add transform profile msapps
Add URL Transform action
To add URL transformation action, at the command prompt, type:
add transform action [-state ( ENABLED | DISABLED )]
Example:
add transform action docx2doc msapps 2
Add URL Transform action
To add URL transform action to replace URL, at the command prompt, type:
add transform action [-state ( ENABLED | DISABLED )]
Example:
add transform action docx2doc msapps 1
Add URL Transform policy
To add a URL transformation policy, at the command prompt, type:
add transform policy [-comment ] [-logAction ]
Example:
add transform policy urltrans_udp "CLIENT.UDP.DSTPORT.EQ(443)" msapps
Bind URL Transform policy with load balancing virtual server of type HTTP/3_QUIC
To bind URL transformation policy with load balancing virtual server of type HTTP/3_QUIC, at the command prompt, type:
bind lb vserver @ ((@ [-weight ] ) | @ | (-policyName @ [-priority ] [-gotoPriorityExpression ] [-type ( REQUEST | RESPONSE )] [-invoke ( ) ] ) | -analyticsProfile @)
Example:
bind lb vs lb-http3 -policyName urltrans_udp -type REQUEST -priority 8
Bind URL transform policy global with HTTP/3 QUIC based load balancing virtual server
To bind a URL transform policy HTTP/3 global bind point, at the command prompt, type:
bind transform global [] [-type ] [-invoke ( ) ]
Example:
bind transform global urltrans_udp 100 -type HTTPQUIC_REQ_DEFAULT
For more information, seeURL转换policy configuration.
Front end optimization (FEO) policy configuration for HTTP/3 traffic
The HTTP protocols that underlie web applications were originally developed to support the transmission and rendering of simple webpages. New technologies such as JavaScript and cascading style sheets (CSS), and new media types such as Flash videos and graphics-rich images, place heavy demands on front-end performance, that is, on performance at the browser level. The Citrix ADC front end optimization (FEO) feature addresses such issues and reduces the load time and render time of webpages.
Note:
HTTP_QUIC _Override/Default_Request
Type is not supported for FEO policy global binding.
Add Front end optimization (FEO) action
To add a FEO action, at the command prompt, type:
add feo action [-pageExtendCache] [][-imgShrinkToAttrib] [-imgGifToPng] [-imgToWebp] [-imgToJpegXR] [-imgInline] [-cssImgInline] [-jpgOptimize] [-imgLazyLoad] [-cssMinify] [-cssInline] [-cssCombine] [-convertImportToLink] [-jsMinify] [-jsInline] [-htmlMinify] [-cssMoveToHead] [-jsMoveToEND][-domainSharding ...] [-clientSideMeasurements]
Example:
add feo action feoact -imgGifToPng -pageExtendCache
Add Front end optimization (FEO) policy
To add a FEO policy, at the command prompt, type:
add feo policy
Example:
add feo policy udp_feo_img "CLIENT.UDP.DSTPORT.EQ(443)" IMG_OPTIMIZE
Bind FEO policy with load balancing virtual server of type HTTP/3_QUIC
To bind FEO policy with load balancing virtual server of type HTTP/3_QUIC, at the command prompt, type:
bind lb vserver @ ((@ [-weight ] ) | @ | (-policyName @ [-priority ] [-gotoPriorityExpression ] [-type ] [-invoke ( ) ] ) | -analyticsProfile @)
Example:
bind lb vserver lb-http3 -policyName udp_feo_img -priority 4 -gotoPriorityExpression END -type REQUEST
Bind FEO policy to HTTP/3 global bind point
To bind a cache policy to the HTTP/3 global bind point, at the command prompt, type:
bind cache global -priority [-gotoPriorityExpression ] [-type ] [-invoke ( ) ]
Example:bind cache global ctx_doc_pdf -priority 3 -type HTTPQUIC_REQ_DEFAULT
For more information, seeFront end optimization policy configuration.
SSL Policy configuration for HTTP/3 traffic
HTTP over QUIC type virtual servers have SSL policy support. However, as QUIC uses UDP as its transport mechanism, TCP based expressions are excluded and UDP based expressions are included. New or existing policy configurations with TCP expressions cannot be bound to HTTP/3 virtual servers or to the newly added HTTP/3 global bind points. Instead of TCP expressions, UDP expressions can be included in the policy configurations that are bound to HTTP/3 QUIC virtual servers or HTTP over QUIC bind points. SSL policies with actions that are supported for TLSv1.3 are only applicable for HTTP/3 bind points or virtual servers.
Add SSL Policy
To add a FEO policy, at the command prompt, type:
add ssl policy -rule [-action ] [-undefAction ] [-comment ]
Example:
add ssl policy ssl-pol -rule CLIENT.SSL.IS_SSL -action NOOP
Bind SSL Policy to HTTP/3 virtual server
To bind an SSL policy to the HTTP/3 virtual server, at the command prompt:
bind ssl policylabel [] [-invoke ( )
Example:
bind ssl vserver lb-http3 -policyName ssl-pol -priority 4 -type REQUEST
Add SSL policy with UDP expression for SSL Policy
To add an SSL policy with UDP expression, at the command prompt:
add ssl policy -rule [-action ] [-undefAction ] [-comment ]
Example:
add ssl policy ssl_udp_clnt -rule "CLIENT.UDP.DSTPORT.EQ(443)" -action NOOP
Bind SSL Policy with UDP expression to HTTP/3 virtual server
To bind an SSL policy with UDP expression to the HTTP/3 virtual server, at the command prompt, type
bind ssl policylabel [] [-invoke ( )
Example:
bind ssl vs lb-http3 -policyName ssl_udp_clnt -priority 8 -type REQUEST
Add SSL policy for CLIENTHELLO bind point for HTTP/3 traffic
To bind SSL policy for CLIENTHELLO bind point for HTTP/3 traffic, at the command prompt, type:
bind ssl policylabel [] [-invoke ( )
Example:
add ssl policy ssl-pol-ch -rule "CLIENT.SSL.CLIENT_HELLO.CIPHERS.HAS_HEXCODE(0x1301)" -action RESET
Bind SSL policy to CLIENTHELLO bind point
To bind an SSL policy to the CLIENTHELLO bind point, at the command prompt, type:
bind ssl policylabel [] [-invoke ( )
Example:
bind ssl vs lb-http3 -policyName ssl-pol-ch -type CLIENTHELLO_REQ -priority 100
Bind SSL policy to HTTP/3 global bind point
To bind an SSL policy to the HTTP/3 global bind point, at the command prompt, type:
bind cache global
Example:
Following is an example of a DATA policy being bound to a HTTP/3 global bind point:
Bind ssl global -policyName ssl-pol-ch -priority 7 -type HTTPQUIC_DATA_DEFAULT
Note:
Forward action that can be set for CLIENTHELLO bind point for SSL virtual servers is currently not supported for HTTP_QUIC type virtual servers.
Application Firewall Policy configuration for HTTP/3 traffic
HTTP over QUIC type virtual servers have web application firewall policy support. However, as QUIC uses UDP as its transport mechanism, TCP based expressions are excluded and UDP based expressions are included. New or existing policy configurations with TCP expressions cannot be bound to HTTP/3 virtual servers or to the newly added HTTP/3 global bind points. Instead of TCP expressions, UDP expressions can be included in the policy configurations that are bound to HTTP/3 QUIC virtual servers or HTTP over QUIC bind points.
Add Web Application Firewall policy with UDP expression
To add Web Application Firewall policy with UDP expression, at the command prompt:
add appfw policy [-comment ] [-logAction ]
Example:
add appfw policy appfw_udp "CLIENT.UDP.DSTPORT.EQ(443)" APPFW_BYPASS
Bind log expressions with UDP based expression for Web Application Firewall profile
To bind log expressions with UDP for Web Application Firewall profile, at the command prompt:
Example:
bind appfw profile APPFW_BLOCK -logExpression logexp-1 "CLIENT.UDP.DSTPORT.EQ(443)"
Bind Application Firewall policy with HTTP/3 virtual server
To bind Web Application Firewall policy with HTTP/3 virtual server, at the command prompt:
bind appfw policylabel [] [-invoke ( )
Example:
绑定磅vs lb-http3 -policyName appfw_udp管理y 3 -type REQUEST
Bind Web Application Firewall policy to HTTP/3 global bind point
To bind a Web Application Firewall policy to the HTTP/3 global bind point, at the command prompt, type:
bind appfw global -priority [-gotoPriorityExpression ] [-type ] [-invoke ( ) ]
Example:
bind appfw global appfw_udp 100 -type HTTPQUIC_REQ_DEFAULT
AppQoE Policy configuration for HTTP/3 traffic
HTTP over QUIC type virtual servers have AppQoE policy support. However, as QUIC uses UDP as its transport mechanism, TCP based expressions are excluded and UDP based expressions are included. New or existing policy configurations with TCP expressions cannot be bound to HTTP/3 virtual servers or to the newly added HTTP/3 global bind points. Instead of TCP expressions, UDP expressions can be included in the policy configurations that are bound to HTTP/3 QUIC virtual servers or HTTP over QUIC bind points.
Add AppQoE policy with UDP based expression
To add AppQoE policy with UDP expression, at the command prompt:
add AppQoE policy [-comment ] [-logAction ]
Example:
add appqoe policy appqoe-pol-udp -rule "CLIENT.UDP.DSTPORT.EQ(443)" -action appqoe-act-basic-prhigh
Bind AppQoE policy with HTTP/3 virtual server
To bind the AppQoE policy with the HTTP/3 virtual server, at the command prompt, type:
bind appqoe policylabel [] [-invoke ( )
Example:
bind lb vs lb-http3 -policyName appqoe-pol-udp -type REQUEST -priority 3
Bind AppQoE policy to HTTP_QUIC virtual server
To bind AppQoE policy toHTTP_QUIC
virtual server, at the command prompt, type:
bind appqoe -priority [-gotoPriorityExpression ] [-type ] [-invoke ( ) ]
Example:
bind lb vs lb-http3 -policyName appqoe-pol-primd -priority 8 -type REQUEST
In this article
- Responder policy configuration for HTTP/3 traffic
- Add responder policy
- Rewrite policy configuration for HTTP/3 traffic
- Compression policy configuration for HTTP/3 traffic
- Add compression policy
- Caching policy configuration for HTTP/3 traffic
- Add cache content group
- URL Transformation policy configuration for HTTP/3 traffic
- Front end optimization (FEO) policy configuration for HTTP/3 traffic
- Bind FEO policy with load balancing virtual server of type HTTP/3_QUIC
- SSL Policy configuration for HTTP/3 traffic
- Bind SSL Policy to HTTP/3 virtual server
- Application Firewall Policy configuration for HTTP/3 traffic
- AppQoE Policy configuration for HTTP/3 traffic
- Bind AppQoE policy to HTTP_QUIC virtual server