Monitor accounting information delivery from a RADIUS server

September 14, 2021

Contributed by:

You can configure a monitor called aRADIUS accounting监控是否RADIUS服务器使用d for Authentication, Authorization, and Accounting (Citrix ADC AAA) is delivering accounting information as expected. The monitor is of type RADIUS_ACCOUNTING. The probe is generated by a Perl script called nsbmradius.pl, which is located in the /nsconfig/monitors/ directory. The script sends successive accounting request probes to the RADIUS server. The probe is considered successful only if the RADIUS accounting server responds with a packet whose Code field is set to 5, which, according to RFC 2866, indicates an Accounting-Response packet.

When configuring a RADIUS accounting monitor, you must specify a secret key. You can specify optional parameters, each of which represents a RADIUS attribute, such as Acct-Status-Type and Framed-IP-Address. For information about these attributes, see RFC 2865, “Remote Authentication Dial In User Service (RADIUS),” and RFC 2866, “RADIUS Accounting.”

To configure a RADIUS accounting monitor by using the command line interface

At the command prompt, type the following commands to configure a RADIUS accounting monitor and verify the configuration:

              add lb monitor  RADIUS_ACCOUNTING [-userName ] {-password } {-radKey } [-radNASip ] [-radAccountType ] [-radFramedIP ] [-radAPN ] [-radMSISDN ] [-radAccountSession ] show lb monitor  
             

Example

加磅监控radAccntMon RADIUS_ACCOUNTING -radKey "8d#>9jr4rV)L7%a2-zW13sM"

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Monitor accounting information delivery from a RADIUS server

September 14, 2021

Contributed by:

September 14, 2021

Contributed by:

Monitor accounting information delivery from a RADIUS server

To configure a RADIUS accounting monitor by using the command line interface

Example

In this article