Getting Started with Citrix ADC
Deploy a Citrix ADC VPX instance
Optimize Citrix ADC VPX performance on VMware ESX, Linux KVM, and Citrix Hypervisors
Apply Citrix ADC VPX configurations at the first boot of the Citrix ADC appliance in cloud
Install a Citrix ADC VPX instance on Microsoft Hyper-V servers
Install a Citrix ADC VPX instance on Linux-KVM platform
Prerequisites for Installing Citrix ADC VPX Virtual Appliances on Linux-KVM Platform
Provisioning the Citrix ADC Virtual Appliance by using OpenStack
Provisioning the Citrix ADC Virtual Appliance by using the Virtual Machine Manager
Configuring Citrix ADC Virtual Appliances to Use SR-IOV Network Interface
Configuring Citrix ADC Virtual Appliances to use PCI Passthrough Network Interface
Provisioning the Citrix ADC Virtual Appliance by using the virsh Program
Provisioning the Citrix ADC Virtual Appliance with SR-IOV, on OpenStack
Configuring a Citrix ADC VPX Instance on KVM to Use OVS DPDK-Based Host Interfaces
Deploy a Citrix ADC VPX instance on AWS
Deploy a VPX high-availability pair with elastic IP addresses across different AWS zones
Deploy a VPX high-availability pair with private IP addresses across different AWS zones
Configure a Citrix ADC VPX instance to use SR-IOV network interface
Configure a Citrix ADC VPX instance to use Enhanced Networking with AWS ENA
Deploy a Citrix ADC VPX instance on Microsoft Azure
Network architecture for Citrix ADC VPX instances on Microsoft Azure
Configure multiple IP addresses for a Citrix ADC VPX standalone instance
配置高可用性与多个设置IP addresses and NICs by using PowerShell commands
Configure a Citrix ADC VPX instance to use Azure accelerated networking
Configure HA-INC nodes by using the Citrix high availability template with Azure ILB
Configure a high-availability setup with Azure external and internal load balancers simultaneously
Configure address pools (IIP) for a Citrix Gateway appliance
Upgrade and downgrade a Citrix ADC appliance
Solutions for Telecom Service Providers
Load Balance Control-Plane Traffic that is based on Diameter, SIP, and SMPP Protocols
Provide Subscriber Load Distribution Using GSLB Across Core-Networks of a Telecom Service Provider
Authentication, authorization, and auditing application traffic
Basic components of authentication, authorization, and auditing configuration
On-premises Citrix Gateway as an identity provider to Citrix Cloud
Authentication, authorization, and auditing configuration for commonly used protocols
Troubleshoot authentication and authorization related issues
-
-
-
-
-
Managing Client Connections
-
Persistence and persistent connections
Advanced load balancing settings
Gradually stepping up the load on a new service with virtual server–level slow start
Protect applications on protected servers against traffic surges
Retrieve location details from user IP address using geolocation database
Use source IP address of the client when connecting to the server
Use client source IP address for backend communication in a v4-v6 load balancing configuration
Set a limit on number of requests per connection to the server
Configure automatic state transition based on percentage health of bound services
Use case 2: Configure rule based persistence based on a name-value pair in a TCP byte stream
Use case 3: Configure load balancing in direct server return mode
Use case 6: Configure load balancing in DSR mode for IPv6 networks by using the TOS field
Use case 7: Configure load balancing in DSR mode by using IP Over IP
Use case 10: Load balancing of intrusion detection system servers
Use case 11: Isolating network traffic using listen policies
Use case 12: Configure Citrix Virtual Desktops for load balancing
Use case 13: Configure Citrix Virtual Apps for load balancing
Use case 14: ShareFile wizard for load balancing Citrix ShareFile
Use case 15: Configure layer 4 load balancing on the Citrix ADC appliance
-
-
-
Authentication and authorization for System Users
-
Configuring a CloudBridge Connector Tunnel between two Datacenters
Configuring CloudBridge Connector between Datacenter and AWS Cloud
配置一个CloudBridge连接器之间的隧道a Citrix ADC Appliance and Virtual Private Gateway on AWS
Configuring CloudBridge Connector Tunnel between Datacenter and SoftLayer Enterprise Cloud
配置一个CloudBridge连接器之间的隧道a Citrix ADC Appliance and Cisco IOS Device
配置一个CloudBridge连接器之间的隧道a Citrix ADC Appliance and Fortinet FortiGate Appliance
CloudBridge Connector Tunnel Diagnostics and Troubleshooting
This content has been machine translated dynamically.
Dieser Inhalt ist eine maschinelle Übersetzung, die dynamisch erstellt wurde.(Haftungsausschluss)
Cet article a été traduit automatiquement de manière dynamique.(Clause de non responsabilité)
Este artículo lo ha traducido una máquina de forma dinámica.(Aviso legal)
此内容已经过机器动态翻译。放弃
このコンテンツは動的に機械翻訳されています。免責事項
이 콘텐츠는 동적으로 기계 번역되었습니다.책임 부인
Este texto foi traduzido automaticamente.(Aviso legal)
Questo contenuto è stato tradotto dinamicamente con traduzione automatica.(Esclusione di responsabilità))
This article has been machine translated.
Dieser Artikel wurde maschinell übersetzt.(Haftungsausschluss)
Ce article a été traduit automatiquement.(Clause de non responsabilité)
Este artículo ha sido traducido automáticamente.(Aviso legal)
この記事は機械翻訳されています.免責事項
이 기사는 기계 번역되었습니다.책임 부인
Este artigo foi traduzido automaticamente.(Aviso legal)
这篇文章已经过机器翻译.放弃
Questo articolo è stato tradotto automaticamente.(Esclusione di responsabilità))
Translation failed!
Managing client connections
To ensure efficient management of client connections, you can configure the content switching virtual servers on the Citrix ADC appliance to use the following features:
- Configuring the ICMP Response.You can configure the Citrix ADC appliance to send ICMP responses to PING requests according to your settings. On the IP address corresponding to the virtual server, set the ICMP RESPONSE to VSVR_CNTRLD, and on the virtual server, set the ICMP virtual server RESPONSE. The following settings can be made on a virtual server:
- When you set ICMP virtual server RESPONSE to PASSIVE on all virtual servers, the Citrix ADC appliance always responds.
- When you set ICMP virtual server RESPONSE to ACTIVE on all virtual servers, the ADC appliance responds even if one virtual server is UP.
- When you set ICMP virtual server RESPONSE to ACTIVE on some and PASSIVE on others, the ADC appliance responds even if one virtual server set to ACTIVE is UP.
Redirecting Client Requests to a Cache
Citrix ADC缓存重定向功能重定向HTTP requests to a cache. You can significantly reduce the burden of responding to HTTP requests and improve your website performance through proper implementation of the cache redirection feature.
A cache stores frequently requested HTTP content. When you configure cache redirection on a virtual server, the Citrix ADC appliance sends cacheable HTTP requests to the cache and non-cacheable HTTP requests to the origin Web server. For more information on cache redirection, see “Cache Redirection.
To configure cache redirection on a virtual server by using the CLI
At the command prompt, type:
set cs vserver \
Example
set cs vserver Vserver-CS-1 -cacheable yes
To configure cache redirection on a virtual server by using the GUI
- Navigate toTraffic Management > Content Switching > Virtual Servers, and open a virtual server.
- InAdvanced Settings, selectTraffic Settings, and selectCacheable.
Enabling Delayed Cleanup of Virtual Server Connections
Under certain conditions, you can configure the down state flush setting to terminate existing connections when a service or a virtual server is marked DOWN. Terminating existing connections frees resources and in certain cases speeds recovery of overloaded load balancing setups.
To configure the down state flush setting on a virtual server by using the CLI
At the command prompt, type:
set cs vserver \
Example
set cs vserver Vserver-CS-1 -downStateFlush enabled
To configure the down state flush setting on a virtual server by using the GUI
- Navigate toTraffic Management > Content Switching > Virtual Servers, and open a virtual server.
- InAdvanced Settings, selectTraffic Settings, and then selectDown State Flush.
Rewriting Ports and Protocols for Redirection
Virtual servers and the services that are bound to them might use different ports. When a service responds to an HTTP connection with a redirect, you might need to configure the Citrix ADC appliance to modify the port and the protocol to ensure that the redirection goes through successfully. You do it by enabling and configuring the redirectPortRewrite setting.
一个虚拟服务器上配置HTTP重定向by using the CLI
At the command prompt, type:
设置cs vserver \ <名称\ > -redirectPortRewrite \ <瓦尔ue\>
Example
set cs vserver Vserver-CS-1 -redirectPortRewrite enabled
一个虚拟服务器上配置HTTP重定向by using the GUI
- Navigate toTraffic Management > Content Switching > Virtual Servers, and open a virtual server.
- InAdvanced Settings, selectTraffic Settings, and selectRewrite.
Inserting the IP Address and Port of a Virtual Server in the Request Header
If you have multiple virtual servers that communicate with different applications on the same service, you must configure the Citrix ADC appliance to add the IP address and port number of the appropriate virtual server to the HTTP requests that are sent to that service. This setting allows applications running on the service to identify the virtual server that sent the request.
If the primary virtual server is down and the backup virtual server is up, the configuration settings of the backup virtual server are added to the client requests. If you want the same header tag to be added, regardless of whether the requests are from the primary virtual server or backup virtual server, you must configure the required header tag on both virtual servers.
Note
This option is not supported for wildcard virtual servers or dummy virtual servers.
To insert the IP address and port of the virtual server in the client requests by using the CLI
At the command prompt, type:
set cs vserver \
Example
set cs vserver Vserver-CS-1 -insertVserverIPPort 10.201.25.136:80
To insert the IP address and port of the virtual server in the client requests by using the GUI
- Navigate toTraffic Management > Content Switching > Virtual Servers, and open a virtual server.
- InAdvanced Settings, selectTraffic Settingsand, in the Virtual Server IP Port Insertion list, select VIPADDR or V6TOV4MAPPING, and specify a port header in the virtual server IP Port Insertion Value.
Setting a Time-out Value for Idle Client Connections
You can configure a virtual server to terminate any idle client connections after a configured time-out period elapses. When you configure this setting, the Citrix ADC appliance waits for the time you specify and, if the client is idle after that time, it closes the client connection.
To set a time-out value for idle client connections by using the CLI
At the command prompt, type:
set cs vserver \
Example
set cs vserver Vserver-CS-1 -cltTimeout 100
To set a time-out value for idle client connections by using the GUI
- Navigate toTraffic Management > Content Switching > Virtual Servers, and open a virtual server.
- InAdvanced Settings, selectTraffic Settings, and specify aClient Idle Time-Outvalue.
Identifying Connections with the 4-tuple and Layer 2 Connection Parameters
You can now set the L2Conn option for a content switching virtual server. With the L2Conn option set, connections to the content switching virtual server are identified by the combination of the 4-tuple (
To set the L2Conn option for a content switching virtual server by using the CLI
At the command line, type the following commands to configure the L2Conn parameter for a content switching virtual server and verify the configuration:
- set cs vserver \ -l2Conn (**ON** | **OFF**) - show cs vserver \
Example
> set cs vserver mycsvserver -l2Conn ON Done > show cs vserver mycsvserver mycsvserver (192.0.2.56:80) - HTTP Type: CONTENT State: UP . . . . . . L2Conn: ON Case Sensitivity: ON . . . . . . Done >
To set the L2Conn option for a content switching virtual server by using the GUI
- Navigate toTraffic Management > Content Switching > Virtual Servers, and open a virtual server.
- InAdvanced Settings, selectTraffic Settings, and then selectLayer 2 Parameters.
Share
Share
In this article
- Redirecting Client Requests to a Cache
- Enabling Delayed Cleanup of Virtual Server Connections
- Rewriting Ports and Protocols for Redirection
- Inserting the IP Address and Port of a Virtual Server in the Request Header
- Setting a Time-out Value for Idle Client Connections
- Identifying Connections with the 4-tuple and Layer 2 Connection Parameters
This Preview product documentation is Citrix Confidential.
You agree to hold this documentation confidential pursuant to the terms of your Citrix Beta/Tech Preview Agreement.
The development, release and timing of any features or functionality described in the Preview documentation remains at our sole discretion and are subject to change without notice or consultation.
The documentation is for informational purposes only and is not a commitment, promise or legal obligation to deliver any material, code or functionality and should not be relied upon in making Citrix product purchase decisions.
If you do not agree, select Do Not Agree to exit.