LSN44 in a cluster setup
Large scale NAT44 configurations are supported on a Citrix ADC cluster setup.
A Citrix ADC cluster is a group of Citrix ADC appliances that are configured and managed as a single system. A Citrix ADC cluster provides scalability and availability. Each Citrix ADC appliance in a cluster setup acts as an independent LSN entity and is managed as a single system.
The LSN configuration in a cluster setup is same as in a standalone appliance except a specific pool of LSN IP addresses are owned by only one node at a time. In other words, an LSN IP pool entity is configured as a spotted entity in a particular node. All the nodes of a cluster setup can have a specific LSN IP pool entity. To make sure that the packets related to an LSN session are received on the same cluster node that performed the NAT operation, policy based backplane (PBS) steering is configured. PBS steers the received related packets of an LSN session to the same cluster node.
Sample configuration:
添加lsn客户机LSN-CLIENT-1做绑定lsn客户机LSN-CLIENT-1 -network 192.0.2.0 -netmask 255.255.255.0 Done add lsn pool LSN-POOL-1 Done bind lsn pool LSN-POOL-1 -ownerNode 1 203.0.113.3 Done bind lsn pool LSN-POOL-1 -ownerNode 2 203.0.113.3 Done add lsn group LSN-GROUP-1 -clientname LSN-CLIENT-1 Done bind lsn group LSN-GROUP-1 -poolname pool1 LSN-POOL-1 Done add ns acl b1 ALLOW -srcIP = 192.0.2.0-192.0.2.255 -type DFD -dfdhash SIP Done apply ns acls -type DFD Done