Clearing LSN Sessions

你可以删除任何不需要的或者低效的LSN sesions from the Citrix ADC appliance. The appliance immediately releases resources (such as NAT IP address, port, and memory) allocated for these sessions, making the resources available for new sessions. The appliance also drops all the subsequent packets related to these removed sessions. You can remove all or selected LSN sessions from the Citrix ADC appliance.

对继续教育ar all LSN sessions by using the command line interface

At the command prompt, type:

冲洗lsn会话显示lsn session 

对继续教育ar selective LSN sessions by using the command line interface

At the command prompt, type:

flush lsn session [-clientname ] [-network  [-netmask ] [-td ]] [-natIP  [-natPort ]] show lsn session 

Example

Clear all LSN sessions existing on a Citrix ADC

flush lsn session Done 

Clear all LSN sessions related to LSN client entity LSN-CLIENT-1

flush lsn session -clientname LSN-CLIENT-1 Done 

Clear all LSN sessions related to a subscriber network (192.0.2.0) of LSN client entity LSN-CLIENT-2 belonging to traffic domain 100

flush lsn session -clientname LSN-CLIENT-2 –network 192.0.2.0 –netmask 255.255.255.0 –td 100 Done 

对继续教育ar all LSN sessions by using the configuration utility

Navigate to System > Large Scale NAT > Sessions, and click Flush Sessions.

Parameter Descriptions (of commands listed in the CLI procedure)

• flush lsn session

  • clientname

    Name of the LSN Client entity. Maximum Length: 127

  • network

    IP address or network address of subscriber(s).

  • netmask

    Subnet mask for the IP address specified by the network parameter.

    Default value: 255.255.255.255

  • td

    Traffic domain ID of the LSN client entity.

    Default value: 0

    Minimum value: 0

    Maximum value: 4094

  • natIP

    NAT IP地址映射用于LSN会话。

  • natPort

    Mapped NAT port used in the LSN sessions.