Enable or disable a cache redirection virtual server
When you create a cache redirection virtual server, it is enabled by default. If you disable a cache redirection virtual server, its state changes to OUT OF SERVICE and it stops redirecting cacheable client requests. However, the Citrix ADC appliance continues to respond to ARP and ping requests for the IP address of this virtual server.
Enable or disable a cache redirection virtual server by using the CLI
At the command line, type one of the following commands:
- enable cr vserver - show cr vserver - disable cr vserver - show cr vserver Examples:
> enable cr vserver Vserver-CRD-1 Done > show cr vserver Vserver-CRD-1 Vserver-CRD-1 (*:80) - HTTP Type: CONTENT State: UP ARP:DISABLED Client Idle Timeout: 180 sec Down state flush: ENABLED Disable Primary Vserver On Down : DISABLED Default: Content Precedence: URL Cache: TRANSPARENT On Policy Match: ORIGIN L2Conn: OFF OriginUSIP: OFF Redirect: POLICY Reuse: ON Via: ON ARP: OFF 1) Cache bypass Policy: bypass-cache-control 2) Cache bypass Policy: Policy-CRD Done > > disable cr vserver Vserver-CRD-1 Done > show cr vserver Vserver-CRD-1 Vserver-CRD-1 (*:80) - HTTP Type: CONTENT State: OUT OF SERVICE ARP:DISABLED Client Idle Timeout: 180 sec Down state flush: ENABLED Disable Primary Vserver On Down : DISABLED Default: Content Precedence: URL Cache: TRANSPARENT On Policy Match: ORIGIN L2Conn: OFF OriginUSIP: OFF Redirect: POLICY Reuse: ON Via: ON ARP: OFF 1) Cache bypass Policy: bypass-cache-control 2) Cache bypass Policy: Policy-CRD Done > Enable or disable a cache redirection virtual server by using the GUI
- Navigate to Traffic Management > Cache Redirection > Virtual Servers.
- In the navigation pane, expand Cache Redirection, and then click Virtual Servers.
- In the details pane, select the virtual server that you want to enable or disable, (for example,Vserver-CRD-1), and then click Statistics.
- In the Proceed dialog box, click Yes.
Enable or disable a cache redirection virtual server
Copied!
Failed!