Bind a classic policy
Depending on the policy type, you can bind a classic policy either globally or to a virtual server. Policy bind points are described in the table, “Policy Type and Bind Points for Policies in Features That Use Classic Policies.”
Note:You can bind a classic policy to multiple bind points.
Bind a classic policy globally by using the CLI
At the command prompt, type the following commands to set the parameters and verify the configuration:
- bind cmp global [-priority ] - show cmp global Example
> bind cmp global cmp-pol-compress -priority 2 Done > show cmp global 1) Policy Name: cmp-pol-compress Priority: 2 2) Policy Name: ns_nocmp_xml_ie Priority: 8700 3) Policy Name: ns_nocmp_mozilla_47 Priority: 8800 4) Policy Name: ns_cmp_mscss Priority: 8900 5) Policy Name: ns_cmp_msapp Priority: 9000 6) Policy Name: ns_cmp_content_type Priority: 10000 Done > Bind a classic policy to a virtual server by using the CLI
At the command prompt, type the following commands to set the parameters and verify the configuration:
- bind lb vserver [] [-policyName [-priority ] - show lb vserver Example
> bind lb vserver lbtemp -policyName cmp-pol-compress -priority 1 Done > show lb vserver lbtemp lbtemp (10.102.29.101:80) - HTTP Type: ADDRESS State: UP Last state change was at Tue Oct 27 06:40:38 2009 (+557 ms) Time since last state change: 0 days, 02:00:40.330 Effective State: UP Client Idle Timeout: 180 sec Down state flush: ENABLED Disable Primary Vserver On Down : DISABLED Port Rewrite : DISABLED No. of Bound Services : 1 (Total) 1 (Active) Configured Method: LEASTCONNECTION Current Method: Round Robin, Reason: Bound service's state changed to UP Group: vserver-grp Mode: IP Persistence: COOKIEINSERT (version 0) Persistence Backup: SOURCEIP Persistence Mask: 255.255.255.255 Persistence Timeout: 2 min Backup Persistence Timeout: 2 min Vserver IP and Port insertion: OFF Push: DISABLED Push VServer: Push Multi Clients: NO Push Label Rule: none 1) http-one (10.102.29.252: 80) - HTTP State: UP Weight: 1 Persistence Cookie Value : NSC_wtfswfs-hsq=ffffffff096e03ed45525d5f4f58455e445a4a423660 1) Policy : cmp-pol-compress Priority:1 Done > Bind a classic policy globally by using the GUI
Note: This procedure documents the Global Bindings dialog box. Depending on the feature for which you want to globally bind a policy, the route by which you arrive at this dialog box may be different.
In the navigation pane, expand the feature for which you want to globally bind a classic policy, and then locate the policy that you want to bind globally.
Note: You cannot globally bind policies for Content Switching, Cache Redirection, SureConnect, Priority Queuing, or Citrix Gateway Authorization.
In the details pane, click Global Bindings.
In the Bind/Unbind
In thePolicy Name列,单击现有政策的名称you want to globally bind, or click New Policy to open the Create
Policy dialog box. After you have selected the policy or created a new policy, in the Priority column, type the priority value.
The lower the number, the sooner this policy is applied relative to other policies. For example, a policy assigned a priority of 10 is applied before a policy with a priority of 100. You can use the same priority for different policies. All features that use classic policies implement only the first policy that a connection matches, so policy priority is important for getting the results you intend.
As a best practice, leave room to add policies by setting priorities with intervals of 50 (or 100) between each policy.
ClickOK.
Bind a classic policy to a virtual server by using the GUI
In the navigation pane, expand the feature that contains the virtual server to which you want to bind a classic policy (for example, if you want to bind a classic policy to a content switching virtual server, expand Traffic Management > Content Switching), and then click Virtual Servers.
In the details pane, select the virtual server, and then click Open.
<功能>虚拟服务器配置对话框中的box, on the Policies tab, click the feature icon for the type policy that you want, and then click Insert Policy.
In the Policy Name column, click the name of an existing policy that you want to bind to a virtual server, or click A to open the Create
Policy dialog box. After you have selected the policy or created a new policy, in the Priority column, set the priority.
If you are binding a policy to a content switching virtual server, in the Target column, select a load balancing virtual server to which traffic that matches the policy should be sent.
ClickOK.