Negotiate authentication policies
As with other types of authentication policies, a Negotiate authentication policy is comprised of an expression and an action. After creating an authentication policy, you bind it to an authentication virtual server and assign a priority to it. When binding it, you also designate it as either a primary or a secondary policy.
In addition to standard authentication functions, the Negotiate Action command can now extract user information from a keytab file instead of requiring you to enter that information manually. If a keytab has more than one SPN, authentication, authorization, and auditing selects the correct SPN. You can configure this feature at the command line, or by using the configuration utility.
Note
这些说明假设您已经厘清iliar with the LDAP protocol and have already configured your chosen LDAP authentication server.
To configure authentication, authorization, and auditing to extract user information from a keytab file by using the command line interface
At the command prompt, type the appropriate command:
add authentication negotiateAction
[-keytab ] set authentication negotiateAction
[-keytab ]
Example
> set authentication negotiateAction negotiateAction-1 -keytab keytab-1
To configure authentication, authorization, and auditing to extract user information from a keytab file by using the configuration utility
Note
In the configuration utility, the term server is used instead of action, but refers to the same task.
- Navigate toSecurity > AAA - Application Traffic > Policies > Negotiate.
- In the details pane, on theServerstab, do one of the following:
- If you want to create a newNegotiateaction, clickAdd.
- If you want to modify an existingNegotiateaction, in the data pane select the action, and then clickEdit.
- If you are creating a newNegotiateaction, in theNametext box, type a name for your new action. The name can be from one to 127 characters in length and can consist of upper- and lowercase letters, numbers, and the hyphen (-) and underscore (_) characters. If you are modifying an existing Negotiate action, skip this step. The name is read-only; you cannot change it.
- UnderNegotiate, if the Use Keytab file check box is not already checked, check it.
- In the Keytab file path text box, type the full path and filename of the keytab file that you want to use.
- In the Default authentication group text box, type the authentication group that you want to set as default for this user.
- ClickCreateorOKto save your changes.